Zdravím.. Môj chladič na cpu strááášne hučí, a prehrieva sa (po zapnutí 65°C, v max. záťaží 86°C).. Myslím, že sa prepiekla stará teplovodivá pasta a vetrák na chladiči po zapnutí 2300RPM, v max záťaži 4700RPM (z max 4706).. Jedná sa o stock intel chladič.. Takže, kupujem nový chladič, a rozhodujem sa nad teplovodivou pastou.. Môžete mi poradiť?.. Neviem sa rozhodnúť medzi MX - 2, MX - 4 od ARCTIC-u, alebo od Cooler Master - Master Gel Maker.. :-) Predom díky. :-)
Every processor needs this heat conductive paste especially the overclocked
The special heat-conducting paste without metallic particles ensures excellent heat dissipation between the processor and the heat sink, improving the stability and reliability of your computer. With its parameters and used material, it minimizes non-conductivity and maximizes the efficiency of the cooler. In addition, due to the absence of metal particles, it will not cause a short-circuit or serious damage to the computer when in contact with electrical contacts.
High efficiency
Another advantage over silicone and metal pastes is the high durability and effectiveness of the paste. Thus, it is not necessary to apply the paste so often to maintain its effectiveness, this paste with the same properties lasts up to eight years. The heat conducting paste can be used on any processor, graphics processor or chipset. The tube contains 4 grams of paste, which is applied directly to the processor at the point where the cooler is fitted. The whole tube is sufficient for several uses.
Parameters and Specifications:
Thermal conductivity:
8.5W/(mK)
Viscosity:
870 poise
Density:
2.5g/ml
Weight:
4g