During the Easter holidays 29.3. and 31.3. all our stores are closed except the AlzaDrive in Senec. On Easter Monday 1.4. all stores are closed, including AlzaDrive, however you can still use the delivery to our AlzaBoxes.

Alza B2B

Welding inverter SHARKS 250-Y10 MIG/MMA IGBT

Catalogue
Welding inverter SHARKS 250-Y10 MIG/MMA IGBT
Soldering iron - voltage/frequency: 230V/50Hz Range of welding current MIG 20-180A; MMA 20-160A, diameter of steel wire 0.6 to 1.0mm, diameter of electrodes 2.0 - 4.0mm (rutile, basic) rated welding current MIG 175A; MMA 155A, nominal input capacity of 8.5KVA, dimensions 680 x 300 x 385mm accessories: welding cable with earth clamp, welding torch cable with 15MB/3m welding cable with electrode holder, welding shield, brush/hammer, pressure reducing valve with preheating, 2x sleeve, 2 nozzles, nozzle
Code:  AUPR2246 Product Number:  SHK447

Don't like the alternatives? Choose from the full product list

Welding inverter SHARKS 250-Y10 MIG/MMA IGBT Discontinued

Welding inverter SHARKS 250-Y10 MIG/MMA IGBT

This small modern welder, the Sharks 250-Y10 MIG/MMA IGBT is uniquely mobile and uses only 230V power. Therefore it can be used for maintenance in a home or professional workshop. The welder is designed for MIG or MMA welding at the same single-phase voltage. This is made possible by a special function to compensate for the supply voltage.

The maximum power is 180A. It is used for welding steel, stainless steel and aluminium using the MIG method. It has a clear display, so you have all the settings under control.

In the pack you will find welding cables for both types of welding, a welding mask and a hammer/brush for cleaning.

The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf
The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf
The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf

Main advantages

  • You can weld using MIG or MMA
  • Power only 230V
  • Input capacity 8.5KVA
  • Designed for professional use
  • Mobile use

What you will find in the package

The Sharks welding machine package contains a grounding cable, welding cables for both types of welding, a quality shield for welding, a brush and hammer.

Specifications can be changed without notice. Images are for illustrative purposes only.

Tie rozmery zvaračky su pravdivé 680x300x380.

Dobrý deň. Je pri tejto zváračke príslušenstvo: zvárací kábel s ukostrovacou svorkou, zvárací kábel s horákom MB 15/3m, zvárací kábel s držiakom elektród, zvárací štít, kefa/kladivko, redukčný ventil s predohrevom, 2x objímka, 2x tryska, hubica? Toto máte v popise a bol by som nerád ak ju objednám a nebude to tam.

příslušenství: svařovací kabel s ukostřovací svorkou, svařovací kabel s hořákem MB 15/3m, svařovací kabel s držákem elektrod, svařovací štít, kartáč/kladívko, redukční ventil s předehřevem, 2x objímka, 2x tryska, hubice. A jaka velikost civky dratu se vejde do svarecky?

Dobrý den je součásti baleni i redukčni ventil a náhradni trysky? Na jiných obchodech udávaji že ano

Docela malý přístroj,dokáže to provařit 8mm materiál ? Nějaké zkušenosti máte?

Zdravím, je v dodávke aj redukčný ventil s predohrevom?

Questions and answers: Welding inverter SHARKS 250-Y10 MIG/MMA IGBT
Accessories for Welding inverter SHARKS 250-Y10 MIG/MMA IGBT Chcete doručit zboží do Česka? Prohlédněte si SHARKS 250-Y10 MIG/MMA IGBT.
P-DC1-WEB18
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me
We care about your privacy Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
More information Less info