CTEK MXS 3.8

Catalogue
CTEK MXS 3.8
4.8 21 rating
Car Battery Charger charging voltage: 12V, charging current up to 3,8A, for batteries up to: 80Ah, maintenance mode, suitable for motorcycles
66.90 €
Price Guarantee
Add to Cart Hassle-free One-click buying using preset Shipping and Payment options.
Warranty 60 months Code:  AUPR4042 Product Number:  40-001 Producer's Website:

CTEK MXS 3.8

It is on cold winter evenings when your car really needs a fully charged battery for easy starting. In case you are not aware of this important information, it will be ideal for you to get the charger that resolves this. The product from CTek is in the category of high performance chargers with microprocessor charging control. Therefore, you can put your mind at ease and forget about the problem of a flat battery.

Key features

  • 12V battery charger
  • Stable charging current from 0.8 to 3.8A
  • Clear LED display
  • Designed for rechargeable battery packs ranging from 1.2 to 80Ah, and possibly up to 130Ah
  • Compact dimensions
  • Universal use
  • Winter mode
  • Complies with protection class IP65

Under the supervision of the microprocessor

This universal battery charger is controlled by a microprocessor. For easy operation, it features a clear LED display that shows the current battery voltage and the selected charging modes. When the charging is complete, the charger automatically switches to the maintenance status, thus avoiding overcharging and subsequent damage to the battery. The charger is designed for all 12V lead-acid batteries. You will also appreciate the pulse charging function (Float/Pulse) based on the principle of alternating charging and discharging and helping to maintain the optimum condition of the battery.

Easy connection

The package includes a connector with terminals for fast connection to the battery. This is a practical solution if you are looking for a quick and easy means of using it on different batteries, in a workshop for example. The optimum connector length is up to 40cm.

Additional information:

Battery types:
All types of 12V lead-acid batteries(wet, MF, Ca/Ca, AGM and GEL)

Dimensions:
168 × 65 × 38mm (L × W × H)

Insulation class:
IP65

Weight:
0.6kg

 

Specifications

Functions
charging, maintenance mode, battery rescue Done!
Wire diameter
12V Done!
Min. charging current
0.8 A Done!
Max. charging current
3.8 A Done!
Max. capacity rechargeable batteries
80 Ah Done!

Functions

Functions
charging, maintenance mode, battery rescue Done!

Features

Wire diameter
12V Done!
Min. charging current
0.8 A Done!
Max. charging current
3.8 A Done!
Max. capacity rechargeable batteries
80 Ah Done!
Type of battery charging
Gel, stationary, traction, AGM, MF, VRLA Done!
Mikroprocesor
yes Done!
Minimum voltage of the battery to be charged
2 V Done!
More Specifications

Specifications can be changed without notice. Images are for illustrative purposes only.

Dobrý den, lze touto nabíječkou nabíjet i 12V akumulatory typu Ca/CA?

Mám baterii AGM  70 Ah na americkém voze a v návodu se píše použijte nastavení AGM nabíječku, abyste omezili nabíjecí napětí na 14,8 voltů. Chci mít jistotu že toto napětí nebude překročeno.. Nabíječku chci také používat přes zimní měsíce, kdy nejezdím, pro udržování stavu baterie. nyní mi kleslo napětí na 11,8 V u dva roky staré baterie. Bude nabíječka CTEK MXS 3.8 správnou volbou? Nebo mám raději volit CTEK MXS 5.0? Dám na Vaše doporučení.

Dobrý den,mám nabíječku CTEK MXS 3.8 a chci si k ní dokoupit CTEK Konektor "cig-plug" do zapalovače.Je tento typ vhodný nebo si mám koupit CTEK Konektor "cig-plug" s indikací.Podle mě je rozdíl pouze v tom,že ta druhá je s indikací,jinak jsou stejné. Děkuji za odpověď.

Dobrý den, je nabíječka vhodná pro baterii AGM, vozidlo se start stop systémem? Může se s ní nabíjet baterie zapojená v vozidle bez odpojení vozu? Děkuji

Dobrý den, chci se jen zeptat, zda se tato nabíječka po nabití akumulátoru, SAMA přepne, do udržovacího režimu a zda můžu nechat motocykl napojený na nabíječku celou zimu. Děkuji

Dobrý, v prípade zapojenia do zapaľovača je dostatočný kábel až k batérií? Dokáže nabiť batériu na naštartovanie?

Dorbý den, chtěl jsem se zeptat zda může být nabíječka CTEK MXS 3.8 napevno připojena na baterii vozidla ( i za jízdy) a nedošlo k poškození nabíječky nebo baterie, tak abych po příjezdu připojil pouze přívodní kabel na 220V. děkuji za odpověď

Dobrý den, je tato nabíječka kompatibilní s konektorem CTEK M6 u kterého máte uvedeno, že je kompatibilní s nabíječkou CTEK MXS 3.6, která už ale není k sehnání... ?

Dobry den, uvazuji zakoupit CTEK 3.8. Je mozne nejak manualne preskocit desulphation fazi nabijeni? Chci baterii nabijet v aute, bez odpojeni, (VW Golf), a obavam se, ze aplikovane pulzy 15.8V mohou poskodit elektroniku v aute.... Dik za odpoved.

Dobrý den, dokáže tato nabíječka oživit i úplně vybitý akumulátor? Děkuji za odpověď.

12
Questions and answers: CTEK MXS 3.8
Accessories for CTEK MXS 3.8 Chcete doručit zboží do Česka? Prohlédněte si CTEK MXS 3.8. Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: CTEK MXS 3.8.
P-DC1-WEB08
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me
We care about your privacy Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
More information Less info