Choose an alternative in the category
Welding Equipment
87
Results
Accessory length: 20mm, diameters: 12, 14 and 16mm, hole diameter: 9 and 10mm, material: ceramics
Discontinued
Order Code:
AUPR2252
Discontinued
Order Code:
AUPR2251
Discontinued
Order Code:
AUPR2250
- - length of the cable: 320cm, length with the sleeve: 122cm, for Fe wire 0.6 and 0.8mm, wire guide material: steel, hole diameter: 1.5 mm, bowden diameter: 4mm
Discontinued
Order Code:
AUPR2249
Accessory - Voltage /frequency: 400V/50Hz, nominal input capacity: 7.5KVA, minimum protection: 25 A, welding current range: 40-160 A, wire diameter: 0.6-1.0 mm, accessories: Terminal, welding cable with burner, welding shield, brush/hammer
Discontinued
Order Code:
AUPR2248
Soldering iron - voltage/frequency: 230V/50Hz, rated input capacity: 6.2 kVA, rated current: 28 A, real output current: 160 A, efficiency: 85%, power factor: 0.85, digital display, electrode diameter: 2-4 mm (rutile, basic), dimensions: 375 x 200 x 275 mm, accessories: welding cable with earth clamp, welding cable with electrode holder, welding helmet, brush/hammer
Discontinued
Order Code:
AUPR2247
Soldering iron - voltage/frequency: 230V/50Hz Range of welding current MIG 20-180A; MMA 20-160A, diameter of steel wire 0.6 to 1.0mm, diameter of electrodes 2.0 - 4.0mm (rutile, basic) rated welding current MIG 175A; MMA 155A, nominal input capacity of 8.5KVA, dimensions 680 x 300 x 385mm accessories: welding cable with earth clamp, welding torch cable with 15MB/3m welding cable with electrode holder, welding shield, brush/hammer, pressure reducing valve with preheating, 2x sleeve, 2 nozzles, nozzle
Discontinued
Order Code:
AUPR2246
- voltage/frequency: 400V/50Hz, rated input capacity of 6.4KVA, welding current range: 50-200A, steel wire diameter: 0.8 to 1.0mm, insulation class: F, water ingress protection: IP21S, dimensions: 650 x 405 x 650mm, accessories: welding cable including earth clamp, welding cable with torch/gun, welding shield, brush/hammer, 2 nozzles, 2 welding sleeves
Discontinued
Order Code:
AUPR2245
Soldering iron - Voltage: 230V / 50Hz, Power consumption: 4000W / 4 KVA at 80A, Welding current range: 55-160A, Vacuum voltage: 48V, Protection: 16A, Electrode diameter: 2-4mm Accessories: welding cables (electrode holder and grounding clamp)
Discontinued
Order Code:
AUPR2244
Accessory length incl. torch: 400cm, Euro connector, Full compatibility for Sharks models
Discontinued
Order Code:
AUPR2243
Self-dimming welding helmet, optical class 1/2/1/3, high quality filter with 4 arc sensors provides field of view 98x43mm, dark glasses DIN 9-13, bright state DIN4, reaction time 1 / 25000s time 0.1- 1.0s, lightening and darkening time 0.3-0, 8ms. In addition, the filter provides protection against UV / IR radiation level DIN16, the helmet has a smooth sensitivity and darkness setting, and a gradual setting of the dimming rate
Discontinued
Order Code:
AUPR2171
Mask welding, reaction time (ms) dark 0,03s, brightening 0,2-0,8s, material polypropionát / polycarbonate,
Discontinued
Order Code:
AUPR2149
Mask welding, reaction time (ms) dark 0,04s, brightening 0,2-1s, material polypropionát / polycarbonate,
Discontinued
Order Code:
AUPR2148
Soldering iron intended for connecting pipes and parts made of thermoplastic material, power input 850W, 230V, temperature 0 to 300 ° C paired extensions 20, 25, 32, 40, 50, 63 mm
Discontinued
Order Code:
CMP006a
Holder for welding, beam length 140 mm, each magnet load 22.5 kg
Discontinued
Order Code:
AUPR1395
