Reviews Filament PM 1.75 PLA + 1kg Black
Reviews Filament PM 1.75 PLA + 1kg Black
Interested in reviews of Filament PM 1.75 PLA + 1kg Black? It got 4.6 out of 5 stars from our customers. Find specific customer reviews of Filament PM 1.75 PLA + 1kg Black below. We will appreciate if you also share your experiences with Filament PM 1.75 PLA + 1kg Black after purchasing.
User Reviews
Vít, Žacléř
Rated 15/06/2022, variant Filament PM 1.75 PLA + 1kg Black
Verified purchase
it twists terribly
At the recommended temperature, the layers did not stick together, it was necessary to raise the temperature to 210 ° C
0 ×Report
Miroslav, Děčín
Rated 06/05/2022, variant Filament PM 1.75 PLA + 1kg Black
Verified purchase
Print absolutely great, just the price. Printing in the first layer 210 then 200 and the temperature of the substrate 60. Hassle-free printing and a relatively good roll. Packed in an openable package for possible re-storage. The black mat is really black.
Adhesion
no deformation
without retraction problems
Price
0 ×Report
Marek, Dúlov 150
Rated 28/04/2022, variant Filament PM 1.75 PLA + 1kg Black
Verified purchase
The string is nice to look at and the print has a nice matte color. But with larger bodies, it deforms worse than ABS. OK for small things, but the longer the length, the worse and I tried different settings, but it always turned out badly. I will already be buying a classic PLA without a +.
Nice matte color
It deforms terribly
0 ×Report
Miloslav, Třemošná
Rated 27/04/2022, variant Filament PM 1.75 PLA + 1kg Black
Verified purchase
So far the best filament I' ve tried and I probably won' t even buy anything else. It looks luxurious, prints great even at higher temperatures. I print up to 225 - 230 and absolutely flawless prints. The individual layers are not even visible. Perfectly smooth and precise, no capillaries, etc.
flawless printing
maybe slightly higher price, but balanced by quality
0 ×Report
Boris, Bratislava
Rated 06/01/2022, variant Filament PM 1.75 PLA + 1kg Black
Verified purchase
My experience with printing on creality printer. I have tried all possible settings, but it is probably impossible to print something with this. Firstly, at the temperatures indicated by the manufacturer (195/60) I couldn't even squeeze out the first layer without it peeling off, I only managed to do that at 210/80. What is a bigger problem is the huge deformation during cooling, by the time he finished printing a 5cm high cutout, it had deformed by 5mm on the base. I preferred to go back to classic PLA.
it deforms terribly
information on recommended temperatures from the manufacturer
0 ×Report
