Reviews Sunlu 1.75mm PLA 1kg Black
Reviews Sunlu 1.75mm PLA 1kg Black
Interested in reviews of Sunlu 1.75mm PLA 1kg Black? It got 3.5 out of 5 stars from our customers. Find specific customer reviews of Sunlu 1.75mm PLA 1kg Black below. We will appreciate if you also share your experiences with Sunlu 1.75mm PLA 1kg Black after purchasing.
User Reviews
Martin, Slaný
Rated 29/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
Price
It's breaking
Strings
0 ×Report
Lukáš, Ořechov
Rated 25/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
price
breaks like a lot
It's hard to print with
0 ×Report
Martin, Nový Bohumín
Rated 19/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
printing at 50/35 mm/s and at 190 °C it printed well
breaking
winding
Humidity
0 ×Report
Jakub, Praha 6 - Bubeneč
Rated 14/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
last pack was ok, I didn't notice anything, now the second pack is stringing, other filament doesn't do it at the same setting
I don't know
strings
0 ×Report
Daniel, Ondřejov
Rated 05/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
more cons than pros breaking of filament after every print shutdown
it springs so that it breaks immediately
strings a lot
cannon bubbles
0 ×Report
Michael, Praha
Rated 04/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
When stored properly, it broke on its own countless times. When I tried to bend it in the extruder it broke almost every time. It may be relatively cheap, but due to the aforementioned problems, about a third of it breaks off. Definitely do not recommend (none of the problems are the fault of the citizen)
Relatively cheaper
Extremely fragile. It breaks on its own xD
Almost unbendable (brittleness
0 ×Report
Customer, Prague 4 - haje
Rated 03/09/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
The first half works fine but the second half is terrible, even if you keep it dry and/or put it in oven at 50 degrees Celsius it is still unusable. Same behavior on all 3 reels I have. If you ha veto trow away 1/2 the reel it becomes very expensive reel. Not worth it ! I will never buy this product again.
first half of the reels work fine
the second half of the reels is unusable
0 ×Report
Jan, Praha
Rated 22/08/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
black
fragile and breaking
0 ×Report
Radim, Libňatov
Rated 20/07/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
My second spool of filament since buying the 3D printer. I was very surprised by the hardness and fragility. Must be dried. With the basic Ender 3 I recommend a pad temperature of 60°C and a hotend temperature of 220°C (the manufacturer specifies 200 - 230°C).
Price
Good adhesion
Wet after unpacking and so cracked and hard
Must be dried after unpacking (old filament? )
Higher melting temperatures by approx. 10°C (range 200 - 230°C)
0 ×Report
Petr, Otrokovice
Rated 28/06/2022, variant Sunlu 1.75mm PLA 1kg Black
Verified purchase
I absolutely do not recommend this filament! After about an hour of printing, the nozzle clogged and the filament broke illogically at the spool. Trying to pull the filament out without passing through the nozzle was impossible, it broke a second time and then a third time. The print itself had too thin lines (0.2mm nozzle, this was even finer) and was more fragile than using other PLAs. I regret that I purchased the product in the store due to time constraints and did not wait a day for the filament to arrive from another manufacturer. Saving 50kč isn't worth it either. I recommend not taking it.
Filament breaks
He clogged the nozzle
Strings
Inconsistent
0 ×Report
