Reviews PLA 3D Filament White 1 kg 1,75 mm
Reviews PLA 3D Filament White 1 kg 1,75 mm
Interested in reviews of PLA 3D Filament White 1 kg 1,75 mm? It got 4.2 out of 5 stars from our customers. Find specific customer reviews of PLA 3D Filament White 1 kg 1,75 mm below. We will appreciate if you also share your experiences with PLA 3D Filament White 1 kg 1,75 mm after purchasing.
User Reviews
Jan, Němčice
Rated 13/10/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
easy to print, nothing to print out
0 ×Report
Customer, Praha 9
Rated 16/04/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
I bought the filament recently, but I've already managed to catch some of the pros and cons. At first glance, you can clearly see the coarser texture of the filament, very visible when you put, for example, smooth filaments from Sunlu, but this is rather just a visual aspect and has nothing to do with the real function, at least in my opinion. What I appreciate about the filament is its flexibility and good adhesion of the layers. It's worse with the adhesion to the mat. When I compare it for example with the already mentioned Sunlu filament how it is a drastic downgrade, some models I print for the third time because the first layer starts to peel off. It usually helps to reduce the speed and raise the temperature to about 215-220 degrees. But it doesn't always help. So maybe the fault is on my side, after all, I wouldn't call myself someone who knows filaments. Anyway, apart from the first layer, the filament prints well and if someone likes to use 3DLac for example, this product is definitely not a bad choice. At the very least, it doesn't break, which I have experienced with Sunlu filament, for example, and it has cost me several times in complications during printing.
price
appearance
Flexibility
the need to use higher temperatures
less grip
0 ×Report
Michal, Praha 5
Rated 12/04/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
When the profile can be tuned for printers it is a usable material, the problem is that for similar money you can get much more trouble-free PLA. Absolutely disastrous adhesion of the first layer, the only solution is glue, 3Dlac or dramatic reduction of the speed of the 1st layer (the solution I use, about 10mm/s). I have not yet encountered a filament from any manufacturer, cheap or expensive, that is this problematic. (Of course, I am talking about a perfectly polished and degreased pad, so you won't be disappointed that you have to deal with this problem too).
Colour nice
Good winding
The price is low, but even so it is not a bargain
It doesn't stick to the pad ! !
It strings, which I couldn't tune out even after 2kg of material. Ironically the stringing was the worst right out of the box, after a few months of sitting on the shelf it's doing better.
0 ×Report
Maroš Kýška, Litostrov
Rated 08/04/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
strings for me
0 ×Report
Customer
Rated 03/04/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase - review from a price comparison website
ok
not
0 ×Report
Karel, Vrané nad Vltavou
Rated 25/03/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase - review from a price comparison website
OK
0 ×Report
Petr, Chlumec nad Cidlinou
Rated 21/03/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase - review from a price comparison website
price
occasionally plugs the nozzle
the colour is more like ivory than pure white
0 ×Report
Jaroslav, Uherské Hradiště
Rated 15/02/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase - review from a price comparison website
Compared to PLA filaments in the same price range, the print quality is visibly worse. It strings throughout the recommended temperature spectrum. Very poor adhesion to the mat.
0 ×Report
Martin, Praha 9
Rated 13/02/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
Someone wrote here that it's falling apart and layers are separating. At what printing temperature? I see delamination of layers below 185°C, i.e. about the same as any other PLA I have here. At the most common 200°, it holds beautifully. As a rough guide, I even measured about 2x more strength than with Creality PLA at all temperatures. The nicest print I get on my printer is at 210˚C, but it's PLA which generally prints well and the differences are small.
I didn't notice any nozzle clogging.
There's a lot of pigment, the color is rich, it's not semi-transparent. This probably makes it denser in the liquid state, it doesn't stretch and stick as much, it's less stringy, but it seems to me a bit worse in one type of detail, such as "stamped" lettering on a vertical wall, where you have to skip briefly and print "in the air", but maybe it could be improved by adjusting the retractions. Otherwise, I don't see anything exceptional about the quality, for my purposes it is a perfectly satisfactory filament.
Seamless printing
Price
Rich colour
The winding is cool
Maybe slightly worse in fine detail
0 ×Report
David, Hodkovice nad Mohelkou
Rated 31/01/2023, variant PLA 3D Filament White 1 kg 1,75 mm
Verified purchase
It does not stick to the pad
Unfortunately, nothing
It doesn't connect
Printed 210,220,230°C
I would like to support Czech production. But alas.
0 ×Report
