Reviews AXAGON PCEM2-DC
Reviews AXAGON PCEM2-DC
Interested in reviews of AXAGON PCEM2-DC? It got 4.3 out of 5 stars from our customers. Find specific customer reviews of AXAGON PCEM2-DC below. We will appreciate if you also share your experiences with AXAGON PCEM2-DC after purchasing.
User Reviews
Anonymous customer
Rated 09/12/2023, variant AXAGON PCEM2-DC
Verified purchase
seems to work as it should for a while
it burns the PCIe circuit on the board after a while, I lost 3 very expensive server motherboards & a PCIe raise slot for another server board, seems it has a problem with it's power circuit design which makes it drain power than the slot can provide.
0 ×Report
Tomáš, Plzeň 12
Rated 19/10/2023, variant AXAGON PCEM2-DC
Verified purchase - review from a price comparison website
You can fit an NVMe drive into a PC that doesn't have the necessary connectors.
It also works for booting on Dell branded workstations.
A variant with an active fan for cooling can be selected.
0 ×Report
Vojtěch, Praha
Rated 31/03/2023, variant AXAGON PCEM2-DC
Verified purchase
It works
0 ×Report
Customer, Praha 9 - Prosek
Rated 28/02/2023, variant AXAGON PCEM2-DC
Verified purchase - review from a price comparison website
everything needed for assembly is included
possibility to connect any SSD, NVMe and SATA M. 2
active cooling will be very topical in summer
0 ×Report
Anonymous customer
Rated 11/02/2022, variant AXAGON PCEM2-DC
Verified purchase
People say here that the “reduction“ is intended for two disks and the other cannot be connected to them, it will probably be because it is designed for one M.2 NVMe and one M.2 SATA, ie not for taxes of the same type… and the manufacturer itself. provides important information and ie. “CHECK YOUR M.2 SSD TYPE“, which is also in the illustrative photo on the website alza.cz Overall product rating: aušus / made in China - serial production, without any output control (to be honest, I was stunned by how many fingerprints there were on the product, I had the product sent to the alza box, where it cooled happily and thanks to that I saw all the greasy fingerprints of the elements on the its surface, this may be in line with my return theory…) Personally, I would not buy an AXAGON product again.
I write reviews because others don' t like it and they don' t solve the real shortcomings of the products they buy.
Despite the shortcomings, it still works, I' m just not sure about the transmission capacity - see shortcomings.
The big downside is definitely the noisy fan, whose noise can really only be regulated by disconnecting it, because it is located just behind the card' s shield, so there is no chance of artificially attenuating the noise before exiting the PC.
Poor quality design… The package also includes an aluminum heatsink, which is to be attached to the M.2 module together with the hot water pad with the supplied rubber bands. M.2 module fastened with the supplied screw (which determines its mounting from the reduction surface), heat-conducting pads, heat sinks and rubber bands so large that it is not possible to fit an aluminum cover with a fan without the rubber band colliding with the fan, which is probably not entirely good for the fan, not even for the M.2 module (it just bends the reduction)… If you put the rubber band so that it does not collide with the fan, then in the case of my M.2 module with one large chip (WD Blue SN570 1TB) also problem, because the rubber band pushes in a place where it has no support and bends the M.2 module, thanks to which the chip on the far side detaches the chip from the heat-conducting paste and the whole cooling system loses its meaning at that moment (rather it will be harder to cool). This is a design error of the manufacturer, when the manufacturer did not count on any space reserves and the instructions are in conflict with reality.
The quality of the whole element is also very dubious, the aluminum cover with the fan is scratched on both sides by production, not that it matters in the box, but it says a lot about the manufacturer. The shield is poorly painted, there are coarse impurities in the paint, this is also nothing that would affect the function of the product, but again it says about the manufacturer (to produce a lot in a short time and not to check the quality).
The biggest quality shortcoming of the whole element is the bus. One piece of the bus from the factory is damaged in the piece that got into my hands, at the end of which part is missing and the material that was supposed to form this part here is about 0.5 m high, which cheerfully irreversibly finished the PCIe 3.0 port of my motherboard . In this problem, I also think that the reason for the low speed of the new disk, after all, just a small point instead of a few mm2 of connection between the card and the board in one of the pins is probably a bit of a difference in permeability.
Poor quality packaging, or did I get a return even though I only checked the new ones? The product was delivered to the alza box in a protective paper bag with a bubble wrap insert, yet the seal on the box has already been peeled off and there is someone' s fingerprint in the glue…
0 ×Report
Filip, Nevidzany
Rated 03/02/2022, variant AXAGON PCEM2-DC
Verified purchase
does what it's supposed to
Cool
0 ×Report
Roman, Uhersky Brod
Rated 15/01/2022, variant AXAGON PCEM2-DC
Verified purchase
simple wiring
they are supposed to be for 2 disks but I managed to plug in only one other disk slot had a reversed beak so I couldn't get it in: ( I'm not returning it but I was disappointed
0 ×Report
Martin, Malachov
Rated 21/06/2020, variant AXAGON PCEM2-DC
Verified purchase
Works as me
0 ×Report
Tomáš, Kosoř
Rated 01/04/2020, variant AXAGON PCEM2-DC
Verified purchase
really fast data transfer over 4 PCIe 3.0 lines
the fan seemed noisy, so I disconnected it
0 ×Report
Petr, Brno 35
Rated 23/03/2019, variant AXAGON PCEM2-DC
Verified purchase
Attached heatsink
Easy installation
No driver needed
Disk recognized the first time
0 ×Report
