Car Brake Tools
Car Brake Tools – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.sk.
Continue
81
Results
Car Mechanic Tools - Press for pearling, Brake pipe clamps, Clamps for common - 90° bends; open - type F; and double - type E, metric: 4.75. 5. 6. 8. 10 mm, "inch": 1/4". 1/2".;
Car Mechanic Tools - working pressure: 0.7-2.8 bar (10-40 PSI), air consumption: 115 l/min. at 2.1 bar, quick coupling to compressor: 1/4", manual pressure regulator with pressure gauge, pressure gauge: 0-140 PSI, spiral filler hose, with ball valve and quick coupling, pressure vessel dimensions: 28 × 21.5 (46 with handle) × 16.5 cm, used liquid container with polyurethane hose ending with rubber adapter for vent screw, accessories supplied: 11 pcs plastic adapters for different brake fluid reservoirs, weight: 8,9 kg
Car Mechanic Tools - 3-pin adapter for pressing brake pistons on cars with electric parking brake
Car Mechanic Tools - Resetting tool for electric parking brake piston VW AUDI FORD
Car Mechanic Tools - cutting machine, for shortening pipes, for copper pipes with a diameter of 4-28 mm, with a knife for aligning sharp edges, silver and black colour, weight 300 g
Car Mechanic Tools - Perforating set for adjusting brake pipe ends, hydraulic spindle
Car Mechanic Tools - Special five-point wrenches for brake calipers, set of 3 sockets (19, 14 and 10 mm)
Car Mechanic Tools - Special kit for changing pads and pistons, With this kit you can easily push both front brake pistons, especially the rear, that also have a helix for the handbrake, where the piston has to be pushed and turned at the same time, The kit contains products for all common cars + cars, which have a different helix on the rear brakes
Brake Piston Press - professional kit, fast and accurate compression of brake pistons on most passenger vehicles
Car Mechanic Tools - does not require an external power source (just fill the tank and draw), the pressure range allows the use of the kit with ABS systems, the possibility of changing the fluid in a short time by one person, 20 psi pressure control valve, equipped with a 45 mm socket suitable for most European models, max. air pressure 1.37 bar, fluid reservoir capacity 400 ml, material HDPE, use for filling and bleeding brake system
Car Mechanic Tools - Set of 6pcs open end wrenches 8-18mm for brake lines
Car Mechanic Tools - Professional pearling press for brake pipes 4.75 mm and 3/16"
Brake Piston Press - Brake Piston Compression Set, 22 pieces
Car Mechanic Tools - Professional pearling press for brake pipes 4.75 mm
Car Mechanic Tools - Reamer for reaming - deburring - reaming pipe ends, wires, etc. diameter 3 to 12 mm, Working range: Wire diameter 3-12mm, Total length 110mm, Profiled handle, Material: plastic + rubber, "milling" head made of S2 steel
Car Mechanic Tools - Set of 22 adapters and pneumatic press for removing VW brake pistons, Damage, BMW, Ford, Honda, Jaguar, Mercedes-Benz i, Supported cars: Opel, Citroen XM, Xantia u. a., Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, toyota, VW, Mazda, Saab 9000, Subaru, Nissan Primera, VW -Golf IV, Audi 80.90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf + Passat, GM Motors, Saab, Renault, Maxima, opel, Citroen C5
Car Mechanic Tools - Strong lever for removing truck and trailer brake springs
Car Mechanic Tools - Brake and hydraulic clutch bleeder kit 9 brake bleeder wrenches, Interchangeable pass-through wrench, Adapter sizes 7/8/9/10/11 /12 mm - in colour, 1.2 mm silicone hose and check valve.
Car Mechanic Tools - suitable for car repair shops, removing the brake calipers, replacement of brake pads, compatibility of the Audi A4, Audi A5, Audi S5, Audi Q5, Audi Q7, Audi S8, Porsche Cayenne, Porsche Macan, Porsche Cayman, Mercedes-Benz, Ford, BMW, Alfa Romeo, in a pack of 17 pcs
Car Mechanic Tools - Adapter for brake pistons - Ford Focus, C - Max, S - Max, Renault Scenic, Megan, Iveco Daily, Volvo V70, 3 pins, Pitch / diameter 31 mm, Pin diameter 6 mm, Pin height 8 mm
Car Mechanic Tools - Brake and clutch system bleeding and filling device, pneumatic, 6 litre container, working temperature: -20° to + 50 °C, working pressure: 5 to 8 bar, vacuum created: -0.7 bar
Car Mechanic Tools - Motorcycle Brake Piston Compression Kit, Tools suitable for all common types of brake systems used in motorcycles, Adapters for pistons with diameters: 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30mm
Car Mechanic Tools - Impact wrench E-TORX for brake service MANTGA TGS TGX
Car Mechanic Tools - Hydraulic Brake Line Punching Tools 3/16" 4.75 mm
Car Brake Tools
Car Brake Tools
In the category Car Brake Tools on Alza.sk, we currently have a total of 81 products, which you can easily buy online and get quickly delivered. See all of your purchases and make orders on our easy-to-use app.
Chcete doručit do České republiky? Jdi na
Nářadí na brzdy auta
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autó fékjavító készletek