Most expensive car Tools
This page includes the most expensive car Tools, or more specifically all products from the category car Tools sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is GYS Powerduction 50LG, which costs 3,739 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
1,282
Results
MAR-POL Ozone generator 20 000 mg/h with timer function Mar-pol M90172
Car Mechanic Tools - ozone generator, Ozone has strong toxic and aseptic properties, therefore it is very well used in room disinfection, The higher the efficiency, the faster the high ozone concentration in the room can be achieved, Operation of the ozonator is very easy - just connect it to the power supply and set it to the selected operating time using the controller, The device removes unpleasant odours, destroys viruses, bacteria and fungi, Extremely efficient ozone generator. The device uses up to 3 million negative ions to purify the air, The ozone generator easily removes unpleasant odors, destroys viruses and bacteria and prevents mold, without additional chemicals, The main features and benefits of our device: Perfect efficiency - thanks to the use of a modern ozone and negative ion generation system, Air sterilization (disinfected, without microorganisms, viruses and bacteria), Fresh scent (eliminates unpleasant odours), Built-in 60-minute timer, Possibility of ozonization of air and water, Intense action, Health be
Jonnesway AG010247 Folding mat 121 × 45 cm
Workshop Lounger - water, oil and fuel resistant, carrying handle, foldable
Magnus MGS01003 Magnus bearing puller set
Car Mechanic Tools - set of pullers with bearing separators from gears, separator sizes 30-50 mm, 50-75 mm, stop screw 180 mm, extension cords; 4×130, 4×105 mm, Crossbar 160 mm, maximum reach 170 mm, 220 mm
ASTA Motor wiring harness A-TD5C
Locking Tool - locking of engine timing, diesel, 2.7 and 3.0 V6, Land Rover (TDV6), Jaguar, Citroen, Peugeot
Quatros Peugeot, Citroen, Toyota, 1.0 / 1.2 VTI
Locking Tool - fixtures for Peugeot Citroen engine timing, 0/1.2 VTI, OEM 0109-2A + OEM 0109-2B, Use of Citroën C1 II (2014-2018), Citroën C3 III (2012-2017), Citroën C3 IV (2016-2018), Citroën C4 Cactus (2014-2018), Citroën C-Elysee (2012-2018), Citroën DS3 (2012-2017), Peugeot 108 (2014-2017), Peugeot 208 (2012-2018), Peugeot 2008 (2013-2018), Peugeot 301 (2012-2015), Peugeot 308 (2013-2018), Peugeot 3008 (2016-2018), Peugeot 5008 (2014-2017), Peugeot Partner III (2015-2018), Toyota Aygo (2014-2018)
FIELDMANN High pressure cleaner FDW 70905-0 20V
Pressure Washer - cordless, portable, max. pressure: 25 bar, flow rate: 150l/h, pressure control and self-suction
89.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FIELD223
HECHT Welding Invetor MMA 140A 10824
Welding Machine - welding inverter, welding current 20 - 140 A, welding voltage 25.6 V, electrode diameter 1 - 3.2 mm, weight 3.4 kg, electrode holder, grounding pliers in the package
89.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
HEChob136
HECHT AKU High-Pressure Washer HECHT 3025 (without battery)
Pressure Washer - cordless, portable, max. pressure: 22 bar, flow rate: 180l/h, plastic, self-suction
BOHLE Glass suction cup Bohle BO603 - three-point, capacity 100 kg
Glass Suction Cups - three-point, load capacity 100 kg, diameter 120 mm, body material: aluminium, weight 1,57 kg
FIELDMANN Inverter welding machine 230V FDIS 20160-E
Welding Machine ensures all the work for easy cutting and homogeneous joining of steel, stainless steel, galvanized metal and alloy. This machine is supplied with a practical welding shield, welding cable and also a grounding cable.
89.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FIELD121
SIXTOL Mechanic Bearing Puller 2, 85 mm
Car Mechanic Tools - front axle bearing installation and removal kit, for 85mm bearings, pressing and pulling directly on the vehicle, plastic case
PROCRAFT Cordless Polisher PM22bb (without Battery)
Car Polisher , max. speed: 4800rev/min, sanding plate diameter: 150mm, weight: 1,8kg
Mar-pol Polyfusion welder M55905
Car Mechanic Tools - Setting range: 50 - 300 degrees Celsius, Maximum load: 2700 W, Power: 1,5 kW, Power supply: 230/50Hz, Grade II: 120 - 300 degrees, Grade I: 50 - 120 degrees
Jonnesway Wrenches W24106S
Car Mechanic Tools - Wrenches for lug nuts Jonnesway 6pcs 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm, Contents of the set: 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm
BOSCH EasyAquatak 100 High-Pressure Washer with Long Lance 0.600.8A7.E01
Pressure Washer - Electric, portable, 1100W power, max. pressure 100 bar, flow rate 270L/h, hose length 3m, max. inlet water temperature 40°C, includes variable nozzle and water filter, dimensions 31.5 × 41 × 20cm (H×W×D), weight 3.3kg
87.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC08c7
SIXTOL Mechanic Bearing Puller 1, 72 mm
Car Mechanic Tools - kit for fitting and removing front axle bearings, for 72mm bearings, pressing and pulling directly on the vehicle, plastic case
GÜDE Self-darkening welding hood GSH-35-VL-TC-2
Welding helmet - self-dimming, suitable for grinding, blackout response time 0.1 ms, degree of protection in darkened condition DIN 5 - 9 and DIN 9 - 13, protection level in clear DIN 4, LED lighting, cooling, powered by a solar cell, plastic material, black colour
86.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
GUDE107
Condor Brake Pipe Perforating Set C.410
Car Mechanic Tools - Press for pearling, Brake pipe clamps, Clamps for common - 90° bends; open - type F; and double - type E, metric: 4.75. 5. 6. 8. 10 mm, "inch": 1/4". 1/2".;
SATRA Wiring harness S-BMBC
Locking Tool - locking of engine timing, mercedes, Chrysler, Jeep, 1.8, 2.0, 2.2, 2.7, CRD
Yato YT-72995 Engine Cooling System Filling Kit
Car Mechanic Tools - vacuum filling machine for engine cooling systems for fast filling of the system with coolant by vacuum, working pressure 6,2 bar, air consumption 340 l/min
Chcete doručit do České republiky? Jdi na
Nářadí na auto
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autós szerszámok
