Cheap PLA Filaments
On this page you will find PLA Filaments at the lowest prices, more so all PLA Filaments ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is Refill Alzament PLA Basic 1kg White marked at 9.99 € incl. VAT. Is this what you’re looking for?
850
Results
Anycubic PLA Filament Black
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 200mm/s
12.49 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANYC251206
Anycubic PLA Filament Red
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 200mm/s
12.49 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANYC251209
Anycubic PLA Filament Grey
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 200mm/s
12.49 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANYC251207
Filament C-TECH ESSENTIAL LINE, PLA, grey, 1,75mm, 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
12.53 €
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF608f
Filament C-TECH ESSENTIAL LINE, PLA, blue, 1,75mm, 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
12.53 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF608d
Filament C-TECH ESSENTIAL LINE, PLA, yellow, 1,75mm, 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
12.56 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF608j
Filament Spectrum PLA Magic SILK 1.75mm Aurora Bloom 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k302
Filament Spectrum PLA Magic SILK 1.75mm Amber Leaf 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
Filament Spectrum PLA Magic SILK 1.75mm Magenta Dream 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k314
Filament Spectrum PLA Magic SILK 1.75mm Magenta Blossom 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
Filament Spectrum PLA Magic SILK 1.75mm Lagoon Breeze 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k310
Filament Spectrum PLA Magic SILK 1.75mm Golden Berry 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k308
Filament Spectrum PLA Magic SILK 1.75mm Vivid Lavender 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k328
Filament Spectrum PLA Magic SILK 1.75mm Mystic Orchid 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
Filament Spectrum PLA Magic SILK 1.75mm Solar Flare 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
Filament Spectrum PLA Magic SILK 1.75mm Solar Eclipse 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
12.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k324
Landu PLA+ White 1kg
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
12.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250710
Landu PLA+ Black 1kg
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
12.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250709
Landu PLA Silk White 1kg
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
12.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250729
Landu PLA Silk Black 1kg
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Add AlzaPlus+ and save instantly
10.97 €
12.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250728
Flashforge Hyper PLA 1,75mm 1kg Sky Blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 350mm/s
12.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla113
Flashforge Hyper PLA 1,75mm 1kg Pure Green
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 350mm/s
12.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla112
Flashforge Hyper PLA 1,75mm 1kg Ice Blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 350mm/s
12.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla114
Flashforge Hyper PLA 1,75mm 1kg Galaxy Black
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 350mm/s
12.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla115
Chcete doručit do České republiky? Jdi na
PLA filamenty
Für den Versand nach Deutschland, besuchen Sie bitte
PLA-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
PLA-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
PLA filamentek