Archive - Drill Accessories
Choose an alternative in the category
Drill Accessories
3,583
Results
Chuck on drill, SDS+ clamping, thread 1/2"-20UNF, minimum clamping diameter 2,5 mm and maximum clamping diameter 13 mm
Discontinued
Order Code:
BOCh6149
Drill Bit -, with a diameter of 28mm and a length of 300mm, SDS Plus mounting,
Discontinued
Order Code:
BOCh6169
Hold Compatible with impact drills. The additional handle allows safe operation of the drills.
Discontinued
Order Code:
BOCh6119
Hold - for Bosch impact drills PSB 500 RE, PSB 500 RA, PSB 650 RE, PSB 750 RCE and PSB 750 RCA
Discontinued
Order Code:
BOCh6126
Attachment - screw-in, Eccentric, for the Bosch IXO II cordless screwdriver, IV, V, VI and VII
Discontinued
Order Code:
BOCh6056
Attachment It is compatible with both corded and cordless drilling screwdrivers. Power Change Plus is even more robust and accurate than its predecessor. Thanks to the reinforced spindle, it is possible to work with better tolerances and thus with less backlash and higher precision. The centre drill bit also makes it easier to work with. Thanks to the keyless system, the hole can be removed by simply and quickly pulling out the plug. The system can be used as a keyless fastener for the punch to the tool.
Discontinued
Order Code:
BOCh6055
Attachment It is compatible with both corded and cordless drilling screwdrivers. Power Change Plus is even more robust and accurate than its predecessor. Thanks to the reinforced spindle, it is possible to work with better tolerances and thus with less backlash and higher precision. The centre drill bit also makes it easier to work with. Thanks to the keyless system, the hole can be removed by simply and quickly pulling out the plug. The system can be used as a keyless fastener for the punch to the tool.
Discontinued
Order Code:
BOCh6054
Attachment The screwdriving attachment allows soft materials, such as plasterboard, to be screwed flat into the face without damaging the surface. It is equipped with a depth-sensitive coupling, allowing clean bonding to the surface without over-tightening the screws. The attachment has a hexagonal ¼ inch spindle and is designed for use with all drill bits and screwdrivers It is suitable for use with PH2 screws only.
Discontinued
Order Code:
BOCh6007
Cup Brush The pot wire brush provides excellent fine surface finish. It is equipped with a crimped wire for less and moderate cleaning. It is suitable for removing coatings and rust and for cleaning formwork and cladding boards. This brush is ideal for use on steel surfaces and is also suitable for roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5926
Depth-stop Drill Bit The Basic attachment for checking the depth of cut allows you to monitor the depth of cut when using segment saw blades, for example when replacing individual parquet floors. Allows four-stage setting defining the limitation of the depth of cut. It is designed for use with all materials. Cutting depths for segment saw blades with a diameter of 85 mm: 8, 10, 12 and 14 mm depth of cut for segment saw blades with a diameter of 100 mm: 14, 16, 18 and 20 mm This depth of cut check attachment is suitable for use with all Starlock, Starlock Plus and Starlock Max tools as well as with standard Bosch multifunction tools.
Discontinued
Order Code:
BOCh5916
Adapter with Female Thread The optional adapter package includes various adapters that allow Bosch Power Change systems to be used with punches from competitors such as Starrett, Baco and Lenox. This package includes two adapters for 14-30 mm diameters (1/2-inch 20UNF thread) and four adapters for 32-210 mm diameters (5/8-inch 18UNF thread).
Discontinued
Order Code:
BOCh5852
Adapter with Female Thread
Discontinued
Order Code:
BOCh5853
Adapter with Female Thread The 1/2-inch threaded adapter allows the use of standard punches up to 32 mm diameter in the quick-release adapter without the need for tools. The transition adapter allows the complete range of standard punches from 14 mm to 210 mm diameters to be used with the Quick Change adapter without the need for tools.
Discontinued
Order Code:
BOCh5871
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5869
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5868
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5864
Adapter with Female Thread The diamond drill bit adapter is a part that ensures compatibility between diamond drilling tools and drill bits. When selecting the correct adapter, close attention should be paid to the information on the tool section and the drill bit section.
Discontinued
Order Code:
BOCh5859
Adapter with Female Thread The diamond drill bit adapter is a part that ensures compatibility between diamond drilling tools and drill bits. When selecting the correct adapter, close attention should be paid to the information on the tool section and the drill bit section.
Discontinued
Order Code:
BOCh5858
Adapter with Female Thread The tool holder with female spindle is designed for drill bits. It is designed to be used for M16 thread.
Discontinued
Order Code:
BOCh5832
Adapter with Female Thread The diamond drill bit adapter is a part that ensures compatibility between diamond drilling tools and drill bits. When selecting the correct adapter, close attention should be paid to the information on the tool section and the drill bit section.
Discontinued
Order Code:
BOCh5855
Discontinued
Order Code:
BOCh6211
Discontinued
Order Code:
EINhob049
Discontinued
Order Code:
BOCh5597nad
Discontinued
Order Code:
BOCh5604nad