This page includes the most expensive free-Standing Benchtop Drills Güde, or more specifically all products from the category free-Standing Benchtop Drills Güde sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Güde GmbH Column drill Gsb 32, which costs 697.12 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
6
Results
Pillar Drill - connection 400 V~50 Hz, engine power 1,5 kW/P1, chuck 5 - 20 mm, spindle feed 120 mm, spindle cone MK3/B22, speed range 110 - 2,880 rpm /min.
Pillar Drill - connection 400 V~50 Hz, motor power 800 W/P1, spindle with conical handle, spindle feed 80 mm, lining 169 mm, spindle speed 210 - 2500 rpm /min, MK2 spindle cone, number of speeds 12, chuck 3 - 16 mm, solid drilling table 260 × 260 mm, cast iron standing plate 240 × 410 mm, overall dimensions 650 × 340 × 1010 mm
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 3 - 16 mm, pinola stroke 90 mm, spindle cone MK2/B16, speed range 290 - 2,500 rpm /min.
Pillar Drill - connection 230 V~50 Hz, motor power 600 W/P1, pinhole stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., spindle taper MK2/B16, speed 5, chuck 3 - 16 mm
Pillar Drill - connection 400 V~50 Hz, motor power 600 W, pinola stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., speed 5, chuck 3 - 16 mm
Pillar Drill - connection 230 Volt~50 Hz, motor power 350 W, spindle travel 50 mm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm /min., speed 5, chuck 1 - 13 mm
Chcete doručit do České republiky? Jdi na
Stojanové stolní vrtačky