Most expensive mortise Locks
This page includes the most expensive mortise Locks, or more specifically all products from the category mortise Locks sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
91
Results
Mortise Lock - lock depth 60 mm, a single west barrier, double-sided right-handed shotgun without transmission, surface white zinc, use of toilet handle, face width 20 mm, backset 40 mm, pitch 72 mm
8.19 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
YALzam004
Mortise Lock - for cylindrical insert - PZ, double-sided right-left needle, with gear, two-west barrier, incl. 1 securing screw, lock face: 20mm
8.09 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
RICH734
Mortise Lock - for cylindrical insert - PZ, left-hand needle, with gear, single-west bolt, incl. 1 securing screw, lock face: 20mm
Mortise Lock - for cylindrical insert - PZ, double-sided right-left needle, with gear, two-west barrier, incl. 1 securing screw, lock face: 20mm
8.09 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
RICH731
Mortise Lock - for single and double doors, liner with gear, pitch 90 mm, Depth of backfill 63 mm, face width 20 mm, backset 45 mm, surface finish white zinc
Mortise Lock - for single and double doors, liner with gear, pitch 90 mm, Depth of backfill 63 mm, face width 20 mm, backset 45 mm, surface finish white zinc
Mortise Lock - for cylindrical insert, pitch 90 mm, bottom 40 mm, depth of backing 60 mm
Mortise Lock - for single and double doors, ordinary, pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 50 mm, surface finish white zinc, not suitable for fire/airtight doors and escape routes
Mortise Lock - for single and double doors, liner with gear, pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 55 mm, surface finish white zinc
Mortise Lock - for single and double doors, ordinary, pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 50 mm, surface finish white zinc
Mortise Lock - for single and double doors, ordinary, pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 50 mm, surface finish white zinc
Mortise Lock - for single and double doors, liner with gear, pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 55 mm, surface finish white zinc
Mortise Lock - ordinary (for classic interior key), pitch 72 mm, Backfill depth 80 mm, face width 20 mm, backset 55 mm, surface finish white zinc, not suitable for fire/airtight doors and escape routes
Lock - tested for 200,000 cycles according to EN 12209:2004, magnetic lock for wooden interior doors, single latch, front: 18mm in matte chrome, backset: 50mm, function - when the door closes, the latch bolt will automatically push into the mortise plate, this is possible with the magnets in both parts of the lock, magnetic, after locking (key, insert, WC handle) the inner mechanism will pull out of reach of the spindle so the handle can be pressed down, but the latch remains in the locked position, suitable for both right and left doors, strike plate must be ordered separately, advantage - quiet operation
Lock magnetic, tested for 200,000 cycles according to ČSN EN 12209: 2004, magnetic lock for wooden interior doors, single-barrier bolt, front: 18mm in matt chrome, backset: 50mm, function - when the door opens, the magnets cause these movements in the lock, after locking (key, insert, WC loop) the inner mechanism is pulled out of the nut's reach and the handle can be depressed but the latch remains locked, suitable for both right and left hand doors, counter parts must be ordered separately, quiet operation
Lock magnetic, tested for 200,000 cycles according to ČSN EN 12209: 2004, magnetic lock for wooden interior doors, single-barrier bolt, front: 18mm in matt chrome, backset: 50mm, function - when the door opens, the magnets cause these movements in the lock, after locking (key, insert, WC loop) the inner mechanism is pulled out of the nut's reach and the handle can be depressed but the latch remains locked, suitable for both right and left hand doors, counter parts must be ordered separately, quiet operation
Lock - mortise plate for a magnetic lock, universal, adjustable by 1mm - for inset doors including a noise barrier
Lock anti-lock brackets for magnetic lock, standard anti-roll bars for both rebated and non-flared doors including anti-noise barrier
Chcete doručit do České republiky? Jdi na
Zadlabací zámky
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Bevésőzárak