This page includes the most expensive 3D Printer Filament C-TECH, or more specifically all products from the category 3D Printer Filament C-TECH sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
125
Results
C-TECH filament PREMIUM LINE PETG zinc yellow RAL1018
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604o
C-TECH filament PREMIUM LINE PETG water blue RAL5021
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604m
C-TECH filament PREMIUM LINE PETG orange right RAL2004
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603y
C-TECH filament PREMIUM LINE PETG transport black RAL9017
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603o
C-TECH filament PREMIUM LINE PETG luminescent light orange RAL2007
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE PETG transport red RAL3020
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603p
C-TECH filament PREMIUM LINE PETG white aluminium RAL9006
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603m
C-TECH filament PREMIUM LINE PLA water blue RAL5021
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE PLA zinc yellow RAL1018
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605u
C-TECH filament PREMIUM LINE PLA steel grey RAL7011
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE PLA signal blue RAL5005
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605i
C-TECH filament PREMIUM LINE PLA oriental red RAL3031
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE PLA purple violet RAL4007
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605h
C-TECH filament PREMIUM LINE PETG sulphur yellow RAL1016
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.87 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604e
C-TECH filament PREMIUM LINE PETG grey aluminium RAL9007
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.87 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604h
C-TECH filament PREMIUM LINE PLA ultramarine RAL5002
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.87 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605p
C-TECH filament PREMIUM LINE PETG signal blue RAL5005
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.87 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604c
C-TECH filament PREMIUM LINE PLA sky blue RAL5015
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.86 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605c
C-TECH filament PREMIUM LINE PLA orange right RAL2004
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.86 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605e
C-TECH filament PREMIUM LINE PETG green-yellow RAL6018
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.86 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF604n
C-TECH filament PREMIUM LINE PETG sky blue RAL5015
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.86 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603w
C-TECH filament PREMIUM LINE PLA squirrel grey RAL7000
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
18.84 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF605r
C-TECH filament PREMIUM LINE PETG purple violet RAL4007
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE PETG green RAL6038
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
18.83 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603t
Chcete doručit do České republiky? Jdi na
Filamenty pro 3D tiskárny
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtató filamentek
