Reviews Creality CR-6-SE
Reviews Creality CR-6-SE
Interested in reviews of Creality CR-6-SE? It got 4.4 out of 5 stars from our customers. Find specific customer reviews of Creality CR-6-SE below. We will appreciate if you also share your experiences with Creality CR-6-SE after purchasing.
User Reviews
Jan, Lenešice
Rated 20/11/2023, variant Creality CR-6-SE
Verified purchase
I ordered a 3D printer 2 weeks ago, after alza messed up the shipping, it's been home for a few days. At home I turned it on, calibrated it and tried the first print. He did horribly. The first thing I had to do was clean and adjust the extruder, straighten the spring into place and pull out the remnants of the filament I had already bought it with. Second, I had to align the X-axis, which was 7.5mm lower on the right side compared to the left. Next, I had to fine-tune the belt tension. However, apart from the autoleveling which absolutely does not work as it should and the firmware, which overall in ender is not much, it is a good printer with great potential. The CR-6 is open to various modifications, there are plenty of firmwares to play it on, or buy a full metal extruder and a proper PTFE tube, or take it completely different and make a modification to a direct extruder, with different autoleveling and different hotend. For people who want to buy and print, this printer is not at all, if you have a few hundred extra so better buy a pass, but if you are a cheapskate like me, it is the ideal choice.
low price
possibility of further upgrades
simple for beginners
accurate and simple video instructions on YT directly from the manufacturer
it's not a buy and print printer
autoleveling does not work as it should
the firmware is worth the price of admission
0 ×Report
Pavel, Nová Paka
Rated 20/06/2023, variant Creality CR-6-SE
Verified purchase
super printer for the price.
I recommend a firmware update
0 ×Report
Marek, Krajková
Rated 08/03/2023, variant Creality CR-6-SE
Verified purchase - review from a price comparison website
After reading some of the reviews I was a little worried, but unnecessarily so. The set up is quick and intuitive, the total autoleveling was done only once and since then it prints without a problem. It's not true that the nozzle would drastically hit the plate, you can put your finger in there. I was going to immediately replace the hotend cover and fans as advised, but I don't care, it's surprisingly quiet and does nothing wrong. Heating up on PLA takes about a minute and then it's on. The temperature of the crocs is max 60 degrees. 2 Z-axes is quite an advantage. Quite heavy, but stable. The program is very simple and modest, it is enough for me, who wants to bother with it, can record something else. In the drawer is a handy tool, two nozzles and a spare extruder and a white PLA coil. Still you get 8 Gb card, flashku and slicer Cura, good simple, Czech. For the money, it can't compete. So far it's been running from morning to night without a problem. Yeah, and it runs fine on Linux.
0 ×Report
Patrik, Hladké Životice
Rated 07/02/2023, variant Creality CR-6-SE
Verified purchase
Although I have modified it a bit (ptfe, hotend, community firmware), but even in the base it printed almost perfectly.
Autoleveling
Double Z
0 ×Report
Lukáš, Semčice (Semčice, Středočeský kraj)
Rated 26/01/2023, variant Creality CR-6-SE
Verified purchase
Cheap
Noisy fans
the filament dispenser stopped working after a year
0 ×Report
Jiří, Všenory
Rated 04/12/2022, variant Creality CR-6-SE
Verified purchase
fast composition
autolevel
Quiet
0 ×Report
Gustav, Ivančice
Rated 30/03/2022, variant Creality CR-6-SE
Verified purchase
price
printing without problems
easy installation and adjustment
noisier
some accessories were missing
0 ×Report
Miloš, Benátky nad Jizerou
Rated 30/01/2022, variant Creality CR-6-SE
Verified purchase
Almost everything except the fan noise
Fan noise
0 ×Report
Tomáš, Bratislava
Rated 21/01/2022, variant Creality CR-6-SE
Verified purchase
My son and I have been printing for practically a month straight since Christmas and he is still printing perfectly. Maximum satisfaction. Some parts were loose and needed to be tightened. Gently move one belt on the X axis to prevent it from fraying. Inac super.
How to assemble it and where to pull it here in the famous video: https://www.youtube.com/watch? v=HvxljVfQPUI
Great for beginners
Lightweight assembly
It was necessary to attract some of the workers
0 ×Report
Milan, Košice
Rated 31/12/2021, variant Creality CR-6-SE
Verified purchase
Ultimaker Cura will also work in Czech, you just need to manually copy the cz directory and the en directory, direct language setting in the program does not work.
With PLA consumption around 110W, a bit audible fans
Noise level is excellent, touch screen
Ability to adjust speed and temperature during printing
It has no problem to print even 200mm/s
350W power transformer
Included software Ultimaker Cura + more on sd card
Working pad 60*C measured 50*
sd cards must have FAT32 format and small capacity (8Gb)
0 ×Report
