Archive - Free-Standing Benchtop Drills
Choose an alternative in the category
Free-Standing Benchtop Drills
30
Results
Pillar Drill - Benchtop column drill for drilling and countersinking, power 500 W
Discontinued
Order Code:
HEChob149
Pillar Drill - carbon brushes, quick-release chuck, speed control, power 450W, usable drill diameter 10 mm
Discontinued
Order Code:
EXTnara022
Pillar Drill - carbon brushes, flat and pointed chisel, SDS-MAX quick-release chuck, weight 9,2 kg
Discontinued
Order Code:
EXTnara023
Pillar Drill - connection 230 V~50 Hz, motor power 550 W/P1, chuck 3 - 16 mm
Discontinued
Order Code:
GGvrt013
Pillar Drill - 230 V~50 Hz connection, motor power 250 W/P1, Chuck 1,5 - 13 mm, Pinola stroke 50 mm, spindle taper B16, solid, speed range 600 - 2,600 rpm /min.
Discontinued
Order Code:
GGvrt008
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 1,5 - 16 mm, Pinola stroke 50 mm, spindle taper B16, solid, speed range 500 - 2,500 rpm /min.
Discontinued
Order Code:
GGvrt011
Pillar Drill - 230 V~50 Hz connection, motor power 1.100 W/P1, chuck 3 - 16 mm, Pinola stroke 150 mm, spindle cone MK2/B16, speed range 500 - 2,200 rpm /min.
Discontinued
Order Code:
GGvrt007
Pillar Drill - connection 400 V~50 Hz, engine power 1,5 kW/P1, chuck 5 - 20 mm, spindle feed 120 mm, spindle cone MK3/B22, speed range 110 - 2,880 rpm /min.
Discontinued
Order Code:
GGvrt006
Pillar Drill - connection 400 V~50 Hz, engine power 1,1 kW/P1, chuck 3 - 16 mm, spindle feed 120 mm, spindle cone MK2/B16, speed range 160 - 3.000 rpm /min.
Discontinued
Order Code:
GGvrt005
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 3 - 16 mm, Pinola stroke 50 mm, spindle cone MK2/B16, speed range 500 - 2,500 min-1
Discontinued
Order Code:
GGvrt003
Drill - 550 W, without hammer, speed up to 2580 rev/min, motor type: carbon, quick release, maximum chuck size: 16mm, weight: 38,5kg
Discontinued
Order Code:
SCHEvrt06
Drill - 550 W, without hammer, speed up to 2580 rev/min, motor type: carbon, maximum chuck size: 13mm, weight: 27kg
Discontinued
Order Code:
SCHEvrt05
Pillar Drill - maximum speed 2500 rpm, power 450 W, adjustable depth stop for precise drilling even in series
Discontinued
Order Code:
EINvrt01
Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 50 Nm, chuck range: 13 mm, with carrying case
Discontinued
Order Code:
RYOBI742
Discontinued
Order Code:
AUPR321759
Discontinued
Order Code:
AUPR321757
Discontinued
Order Code:
LCx999
Discontinued
Order Code:
LCx998
Discontinued
Order Code:
SCmisc6912
Discontinued
Order Code:
SCmisc6910
Discontinued
Order Code:
SCmisc6909
Pillar Drill - 800 W, speed up to 2500 RPM, nine-speed, quick-action chuck, maximum chuck size: 16mm, weight: 56kg
Discontinued
Order Code:
GUDE055
Drill - 390 W, without hammer, speed up to 2430 RPM, five-speed, maximum chuck size: 13mm, weight: 21,2kg
Discontinued
Order Code:
RYOBI123
Pillar Drill - 500 W, 1280 - 2350 rpm, 9 gears, 170 x 170mm table diameter, 46mm diameter, 16mm chuck
Discontinued
Order Code:
PHT163
Objavte v sebe domáceho majstra s náradím Einhell
Už ste počuli o batérii Power X-Change od spoločnosti Einhell? Dokáže s úplnou ľahkosťou poháňať všetku dielenskú a záhradnú techniku. Vďaka jednému typu batérie ušetríte nielen kopu času, ale aj peňazí.
Ako sa vyznať medzi jednotlivými typmi vrtákov? Ktorý použiť na drevo, ktorý na kov? A čo robiť, keď sa vrták otupí? V tomto článku prenikáme do tajov tohto náradia a odpovieme na tie najzásadnejšie otázky.
Každý domáci majster potrebuje vŕtačku. Jej výber ale nemusí byť na prvý pohľad tak jednoduchý. V článku preberieme rôzne druhy vŕtačiek a ukážeme si, čo je potrebné na vŕtanie do panelu, vŕtanie do betónu a ďalších materiálov. Čo všetko je dôležité poznať pri výbere...
battery-powered toolsNáradie Bosch Professional uspokojí nielen remeselníkov
Značka Bosch Professional zahŕňa náradie a príslušenstvo pre profesionálov a remeselníkov. Po všetkých stránkach je pripravené na zvýšenú záťaž a každodenné používanie. Že vás remeslo neživí, a napriek tomu držíte brúsku, vŕtačku či aku skrutkovač v ruke niekoľkokrát...