Archive - Car Tools
Choose an alternative in the category
Car Tools
908
Results
Discontinued
Order Code:
ASTnnm29
Discontinued
Order Code:
ASTnnm13
Car Mechanic Tools - Socket 10-point 15mm for brake calipers AUDI Q7 S8, PORSCHE Macan Cayenne Cayman, 15mm 10-point socket for brake caliper
Discontinued
Order Code:
ASTnpm68
Car Mechanic Tools - Professional pearling press for brake pipes 4.75 mm and 3/16"
Discontinued
Order Code:
ASTnpm83
Car Mechanic Tools - Strong lever for removing truck and trailer brake springs
Discontinued
Order Code:
ASTnpm79
Car Mechanic Tools - Adapter for brake pistons - Ford Focus, C - Max, S - Max, Renault Scenic, Megan, Iveco Daily, Volvo V70, 3 pins, Pitch / diameter 31 mm, Pin diameter 6 mm, Pin height 8 mm
Discontinued
Order Code:
ASTnpm74
Car Mechanic Tools - Brake piston extruders, for servicing press-fit (front brakes) and bolt-on calipers (rear brakes)
Discontinued
Order Code:
ASTnpm63
Car Mechanic Tools - A product used to bleed the brake system, checking the vacuum sensors, the throttles, exhaust gas recirculation valve, brake booster, fuel pressure regulator, pressure modulator in automatic transmissions, Volume 0,75l, Temperature at work: -20°C to +50°C, Pressure required: 5 to 8bar, Air consumption approx. 180l/min, Created vacuum: 0,5bar, Thread for pressure connection. air: 1/4"
Discontinued
Order Code:
ASTnpm54
Car Mechanic Tools - Cutting agent, splitting of nuts 3-24 mm, For cutting heavily rusted nuts, without damaging the screw thread, 360° swivel, To remove nuts with damaged heads, Even a partially cut nut can be loosened using the arm
Discontinued
Order Code:
ASTnpm23
Car Mechanic Tools - Adapter for brake caliper repair Vw Audi Bmw Alfa Opel Nissan Saab Rover Ford Subaru Honda, Adjustable adapter special design for brake caliper repair, CARS: Alfa Romeo 164 2.0, ford, Mazda, Saab 9000, Subaru, Nissan Primiera, VW-Golf IV, Audi 80,90, V8 + 100, Ford Sierra ABS+Scorpio ab85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf+Passat, Ford, opel, Audi, BMW, Lancia, Proton, Renault, Rover, VW, Peugeot 307,308
Discontinued
Order Code:
ASTnpm13
Car Support - Maximum load capacity on both supports: 3T (3000 kg), Minimum height: 280 mm, Maximum height: 400 mm, Base dimensions: 185 x 200 mm, Weight: 4,7 kg
Discontinued
Order Code:
PWMppr01
Support - The overall dimensions of the device are 60 × 45 cm, Adjustable front height in three levels, The height at the highest level at the front is 40 cm, Width of the groove at the front 15 cm, depth 10 cm, Width of the groove at the back 16 cm, depth 10 cm
Discontinued
Order Code:
PWMppr04
Car Support - car supports 3 tons, Min. Lift height: 288 mm, Max. stroke height: 425 mm, Weight 2 pcs: 7.0 kg, Support capacity: 3 T, Min. Height:288 mm, Max. Height:425 mm, Weight 2pcs : 7,0 kg
Discontinued
Order Code:
PWMppr02
Jack - lever, load capacity of 2500kg, lifting range: 89-359mm, weight: 15kg
Discontinued
Order Code:
AUPRGE013
Welding Machine - MIG/MAG, MMA, FCAW-Flux, TIG-Lift, LCD Display, power input 5.3 kW, control range of welding currents 20-160 A, Loadmaster: 40% 160A/22V, 60% 113A/19.65V, 100% 88A/13.4V, wire diameter 0,6-1,0 mm, wire feeding speed 2,5-12 m/min, burner cable length 3 m, weight 14 kg
Discontinued
Order Code:
PROsva006
Welding Machine - MIG/MAG, MMA, FCAW-Flux, TIG-Lift, LCD Display, power input 7.1 kW, control range of welding currents 20-200 A, Loadmaster: 40% 200A/24V, 60% 142A/21.1V, 100% 110A /19.5V, wire diameter 0,6-1,2 mm, wire feeding speed 2,5-12 m/min, burner cable length 3 m, weight 15 kg
Discontinued
Order Code:
PROsva005
Welding Machine - MIG/MAG, MMA, FCAW-Flux, TIG-Lift, LCD Display, power input 6.5 kW, control range of welding currents 20-180 A, Loadmaster: 40% 180A/23V, 60% 127A/20.35V, 100% 98A/18.9V, wire diameter 0,6-1,0 mm, wire feeding speed 2,5-12 m/min, burner cable length 3 m, weight 14,5 kg
Discontinued
Order Code:
PROsva007
Welding Machine - LCD Display, arc force function, anti stick, hot start, power input 7 kW, control range of welding currents 20-200 A, Loadmaster: 40% 200A/28V, 60% 163A/26.5V, 100% 126.5A/25.1V, length of welding cables 3 m, electrode diameter: 2-6 mm
Discontinued
Order Code:
PROsva004
Welding Machine - LCD Display, arc force function, anti stick, hot start.., power input 6.1 kW, control range of welding currents 20-180 A, Loadmaster: 40% 180A/27.2V, 60% 127.3A/25.1V, 100% 98.6A/23.9V, length of welding cables 3 m, electrode diameter: 2-5 mm
Discontinued
Order Code:
PROsva003
Welding Machine - LCD Display, arc force function, anti stick, hot start, power input 5.3 kW, control range of welding currents 20-160 A, Loadmaster: 40% 160A/26.4V, 60%: 113A/24.5V, 100%: 87A/23,5V, welding cable length 2,8 m, electrode diameter: 1.6-4 mm
Discontinued
Order Code:
PROsva002
Welding Machine - LCD Display, arc force function, anti stick, hot start, power input 4.5 kW, control range of welding currents 20-140 A, Loadmaster: 40% 140A/25.6V, 60% 99A/24V, 100% 76A/22.1V, length of welding cables 2,8 m, electrode diameter: 1.6-4 mm
Discontinued
Order Code:
PROsva001
Discontinued
Order Code:
PWP219
Welding Machine - power MIG 4,6 kVA, MAG 5,3 kVA, welding current range: 10-160 A, electrode diameter 1.6-4.0 mm, welding wire: 0.8 - 1.0 mm
Discontinued
Order Code:
WETRho006
Welding Machine - power input 5,9 kW, maximum no-load voltage 69 V, welding current range: 10-140 A, electrode diameter 1.6 - 3.2 mm
Discontinued
Order Code:
WETRho005