Archive - Car Tools
Choose an alternative in the category
Car Tools
964
Results
Car Polisher 600W, max. speed: 5000rev/min, sanding plate diameter: 125mm, weight: 2,1kg
Discontinued
Order Code:
SCHEles01
Kit - set of cable lugs, isolated, sorted, made in Germany according to DIN46228, contains 16 pcs - 3 × .5 mm²; 3 × .75 mm²; 3 × 1, mm²; 3 × 1.5 mm²; 2 × 2.5 mm²; 1 × 4, mm²; 1 × 6, mm² practical packaging each size has its own labelled box
Discontinued
Order Code:
CONkon001
Discontinued
Order Code:
AUPRtol003
Discontinued
Order Code:
EINhob017
Discontinued
Order Code:
MADZ818
Discontinued
Order Code:
MADZ819
Discontinued
Order Code:
CMP2477
Discontinued
Order Code:
CMP2460
Discontinued
Order Code:
ASTnnm89
Discontinued
Order Code:
ASTnnm51
Discontinued
Order Code:
ASTnnm40
Discontinued
Order Code:
ASTnnm29
Discontinued
Order Code:
ASTnnm13
Car Mechanic Tools - Socket 10-point 15mm for brake calipers AUDI Q7 S8, PORSCHE Macan Cayenne Cayman, 15mm 10-point socket for brake caliper
Discontinued
Order Code:
ASTnpm68
Car Mechanic Tools - Professional pearling press for brake pipes 4.75 mm and 3/16"
Discontinued
Order Code:
ASTnpm83
Car Mechanic Tools - Strong lever for removing truck and trailer brake springs
Discontinued
Order Code:
ASTnpm79
Car Mechanic Tools - Adapter for brake pistons - Ford Focus, C - Max, S - Max, Renault Scenic, Megan, Iveco Daily, Volvo V70, 3 pins, Pitch / diameter 31 mm, Pin diameter 6 mm, Pin height 8 mm
Discontinued
Order Code:
ASTnpm74
Car Mechanic Tools - Brake piston extruders, for servicing press-fit (front brakes) and bolt-on calipers (rear brakes)
Discontinued
Order Code:
ASTnpm63
Car Mechanic Tools - A product used to bleed the brake system, checking the vacuum sensors, the throttles, exhaust gas recirculation valve, brake booster, fuel pressure regulator, pressure modulator in automatic transmissions, Volume 0,75l, Temperature at work: -20°C to +50°C, Pressure required: 5 to 8bar, Air consumption approx. 180l/min, Created vacuum: 0,5bar, Thread for pressure connection. air: 1/4"
Discontinued
Order Code:
ASTnpm54
Car Mechanic Tools - Hydraulic set for adjusting and pearling the ends of the brake pipe of a car, with hydraulic spindle , The set includes: jaws for pipes with a diameter of 4.75 mm, 5 mm and 6 mm, strap for clamping wires, punching machines and wire cutting equipment, Contents of the set: jaws for pipes with a diameter of 4.75mm, 5mm and 6mm, a strip to push, punches, pipe cutting jig
Discontinued
Order Code:
ASTnpm30
Car Mechanic Tools - Cutting agent, splitting of nuts 3-24 mm, For cutting heavily rusted nuts, without damaging the screw thread, 360° swivel, To remove nuts with damaged heads, Even a partially cut nut can be loosened using the arm
Discontinued
Order Code:
ASTnpm23
Car Mechanic Tools - Perforating knife for cutting brake pipes and tubes with diameters of 3-35mm, Range: 1.8" - 1" 3/8" 3-35mm
Discontinued
Order Code:
ASTnpm21
Car Support - Maximum load capacity on both supports: 3T (3000 kg), Minimum height: 280 mm, Maximum height: 400 mm, Base dimensions: 185 x 200 mm, Weight: 4,7 kg
Discontinued
Order Code:
PWMppr01
Support - The overall dimensions of the device are 60 × 45 cm, Adjustable front height in three levels, The height at the highest level at the front is 40 cm, Width of the groove at the front 15 cm, depth 10 cm, Width of the groove at the back 16 cm, depth 10 cm
Discontinued
Order Code:
PWMppr04
