Cheap work Tools

Vice jaw opening: , jaw width: 125mm

Screwdriver Set - flat, cross, torx, ergonomic handles, shank material s2 steel, 8 screwdrivers in the pack

Angle Grinder - disc diameter 50 mm, max. speed 20000 rev/min, speed control, weight 0.88 kg, service key included

Socket Wrench Set - extension, tap wrench, universal joint and socket wrenches included in the box, case included, 20-piece, 1/4" square drive, hexagonal head profile, chrome vanadium steel (cr-v) and chrome molybdenum steel (cr-mo) head material, plastic handle, 72 teeth, ergonomic grips, switching mechanism and As-Drive system, total ratchet length 155 mm, weight 3 kg

Power Sander - electric, power input 180 W, 28000 OPM, delta sanding pad, velcro paper fastening, sanding surface dimensions 140 × 80 mm (L×W), dust filter, built-in suction, weight 1 kg, dimensions 8 × 14 cm (W×D), dust extraction adapter, dust bag and 5 brusných papírů included

Drill Driver - battery SHARE20V Li-ion, speed I. 0-500/min, II. 0-1800/min, number of impacts I. 0-8800/min, II. 0-28500/min, L/P course, yes, quick-release head all-metal 1/2", drill diameter 0,5-10 mm, degrees of utah. torque 20 + drilling, screwdriving, hammer drilling, max. torque 50/33 Nm, max. drilling into wood 25 mm, max. drilling into steel 6 mm, max. drilling into masonry 8 mm, Length 15 cm, weight with battery 1.3 kg, 50 Nm brushless motor, all-metal chuck with locking, Continuous torque adjustment plus drilling, Screwing, tap, all-metal gearbox, LED flashlight with range, Drilling with impact drilling can also handle harder materials and masonry, for universal batteries SHARE20V

Attachment - compatible with GSR 12V-15 FC, attachment with 1/4" hexagonal bit holder with locking, "One-Click" interface for quick and tight clamping, Ensures a firm hold on the bits without unintentional loosening, length 159 mm with GSR 12V-15 FC, enables precise work even in confined spaces

Car Mechanic Tools for air pressure control with water separator and lubrication, range 0 - 10 bar, inlet and outlet thread - internal G 1/2", scale in bar/psi

Mallet plumbing, with plastic strikers and wooden handle, white is nylon, red is polyurethane

Vice jaw opening: , jaw width: 125mm

Cordless Screwdriver - maximum speed 250 rev/min, maximum torque 4 Nm, built-in battery with a capacity of 1,3 Ah and battery voltage 4 V, work surface lighting, battery status indicator and rotation direction switch, clamping type internal hexagon, bits, power cable and transport packaging included, weight 0.271 kg, yellow colour

Cutting Pliers - straight flat jaws, side cutting edge, for cutting material with max. diameter 10 mm, ergonomic, non-slip and lever handle, material carbon steel, length 600 mm, weight 2,36 kg