Zdravim, uz mel nekdo problem s bootovanim kvuli tomuto na UEFI bios desce? Ja kdyz mam desku v UEFI modu, tak mi to zpusobuje problemy (mrznuti) pri bootu. Na podruhe se podari nabootovat a vse funguje, ale cekam treba 2 minuty nez to zacne neco delat. Pokud desku prepnu do legacy modu, tak to funguje ok.
Axago RSI-20
Adapter - for connecting an IDE disc or an ATAPI drive via SATA interface to a PC, internal
Show full description
Code:
AG200d5
Producer's Website:
Don't like the alternatives? Choose from the full product list
Axago RSI-20
Discontinued
Axago RSI-20
Off
This device quickly and easily resolves the problem of connecting an older IDE hard drive or an ATAPI drive via a SATA interface to a PC.
The adapter is purely hardware so its installation is absolutely trivial without the need to install any drivers.
It is designed for all 3.5" ATA 100/133 drives and 5.25" ATAPI CD/DVD drives.
Off
RIGID
DESIGN
Both the adapter's electronics and connectors are well protected by a rigid plastic case.
Off
DIRECT
CONNECTION
This compact adapter has a 40-pin IDE connector integrated directly in the body and is plugged directly into the IDE port on a drive.
3.5" DISC
CONNECTION
The front panel includes a standard SATA connector for connecting to a PC motherboard SATA controller, a standard 4-pin floppy power connector to a PC power supply, and a connector for connecting a PC housing LED indicator cable to indicate the drive activity.
Off
5.25" DRIVE
CONNECTION
The adapter also supports all standard optical ATAPI CD-ROM, DVD-ROM, CD-RW, combo and DVD-RW drives.
For burners, it may be necessary to set the SATA port for the IDE emulation in the computer BIOS.
Off
Input interface:
1x SATA
Ports:
1x IDE 40-pin (Ultra ATA 133)
1x 4pin floppy (power)
Device support:
3.5" HDD, 5.25" drive
Power supply:
from a PC power supply
Features:
Features a 40-pin IDE interface for 3.5" discs and 5.25" drives.
Supports IDE HDDs and optical ATAPI CD-ROM, DVD-ROM, CD-RW, combo and DVD-RW drives.
Supports all PIO and DMA modes.
Features an Ultra ATA/133 compatible interface.
Plug and play.
Features a standard SATA connector for connecting to a SATA PCB motherboard controller.
Complies with the Serial ATA 1.0a specification with a maximum theoretical data rate of 1.5Gb/sec.
Supports Hot Plug for SATA connectivity.
Powered via a standard 4-pin floppy power connector to a PC power supply.
Features a connector for connecting a PC housing LED indicator cable to indicate the disk activity.
More information:
Dimensions: 61 x 29 x 19mm
Weight: 19g
Supported Operating Systems:
MS Windows all versions, Mac OS all versions, Linux all versions, DOS and all other operating systems.
Note: It is a hardware adapter, no drivers are installed, compatibility is not dependent on the operating system.
Packaging in cardboard box contains:
SATA - IDE adapter and installation instructions in English, Czech, Slovak and Polish.
Specifications
Use
Operating System
Width
Height
Depth
Use
Use
Compatibility
Operating System
Dimensions
Width
Height
Depth
RealQ s.r.o. Železná 663/5 619 00 Brno Česká republika https://www.axagon.eu/cs/contact
Note:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
