Chladič Cooler Master Hyper TX

Don't like the alternatives? Choose from the full product list
Chladič Cooler Master Hyper TX
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported processors:
Socket 754, 939, 940 and M2
Dimensions:
Passive part:90 x 44 x 137 mm
Fan:92 x 92 x 25 mm
Weight:
452 g
Speed:
650 - 1800 rev./ min.(intelligent speed regulator)
Větráčku life:
40 000 hours
Noise:
22 dB (A)
Power:
12 volts (4-pin connector)
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.

