XIGMATEK Aegir SD128264 Heatpipe Cooler

Excellent cooler for modern Intel and AMD. It is compatible with Intel Socket LGA 775/1156/1366 and AMD AM2/AM2 +/AM3. This cooler has six heatpipe direct contact with the tube heater processor and very quiet fan with dimensions 120 x 120 x 25 mm. Two tubes have a diameter of 8 mm and the remaining four are of 6 millimeter. Power supply fan is provided 4pinovým connector supporting PWM, which also allows fan speed control. Bearing fan is the quality Long Life Bearing. Optionally, on the other hand, fins mounted a second fan which increases the efficiency (one fan sucks air and blows it second). Total processing cooler is good and the design is certified classic. Cooler adds to the beauty of the white backlight fan.

Heatpipe technology is based on the principle of a closed tube, where the "-heated 'end is a liquid with a low boiling point, which heating begins to evaporate and the vapor phase rises to the" cooled "end, where it condenses and the walls of the tube is returned in liquid form backwards. When heated liquid is the waste heat from the chip is used to change the state, and that then in the form of superheated steam travels to the opposite end, which is necessary to cool to a temperature at which the vapor condenses. Compared to classical convention offers a technology heatpipe higher heat transfer efficiency, but only if a sufficient temperature difference between the two ends of the tube and its correct orientation.

Specifications:

Supported sockets:
Intel: Socket LGA 775, LGA 1156, LGA 1366
AMD socket AM2/AM2 +/AM3

Material:
Aluminum

Heatpipe:
Number of tubes: 6
Tube diameter: 8 mm 2x, 4x 6 mm
With direct contact heater Processor

Fan:
Dimensions: 120 x 120 x 25 mm
Noise: 20 dBA
Fan Speed: 1000 - 2200 RPM
Air Flow: 89.45 CFM (Max.)
Air Pressure: 4.1 mmH2O (Max.)
Life span: 50,000 hours
Bearing: Long Life
LED backlight: White

Connector:
4-pin (PWM)

Dimensions:
130 x 159 x 66.4 mm

Weight:
670 g