GEKO Taps set 110pcs

This practical set of GEKO taps and dies, made from standard tool steel, is designed for both professionals and DIY enthusiasts. The set contains a total of 110 metric taps and dies for manual threading with a tap wrench. In the set, you will find two taps for each size: the first is a taper tap for starting the thread, and the second is a plug tap for finishing the thread, even in a blind hole. All the tools are neatly organised in a metal case for easy transport and storage.

Set Contents

35 pcs Dies (13 pcs O 38, 22 pcs M25):
2×0.4 3×0.5 4×0.7 5×0.8 6×1.0 6×0.75 7×1.0 7×0.75 8×1.25 8×1.0 8×0.75 9×1.25 9×1.0 9×0.75 10×1.5 10×1.25 10×1.0 10×0.75 11×1.5 11×1.25 11×1.0 11×0.75 12×1.75 12×1.5 12×1.25 12×1.0 12×0.75 14×2.0 14×1.5 14×1.25 14×1.0 16×2.0 16×1.5 16×1.0 18×1.5

70 pcs Taps (35 pcs taper taps and 35 pcs plug taps):
2×0.4 3×0.5 4×0.7 5×0.8 6×1.0 6×0.75 7×1.0 7×0.75 8×1.25 8×1.0 8×0.75 9×1.25 9×1.0 9×0.75 10×1.5 10×1.25 10×1.0 10×0.75 11×1.5 11×1.25 11×1.0 11×0.75 12×1.75 12×1.5 12×1.25 12×1.0 12×0.75 14×2.0 14×1.5 14×1.25 14×1.0 16×2.0 16×1.5 16×1.0 18×1.5

• 1 pc tap wrench with chuck (sliding T-handle, 4 clamping jaws for holding the tap)
• 1 pc tap wrench: M3–M12 (1/8"–1/2")
• 1 pc tap wrench: M6–M20 (1/4"–3/4")
• 1 pc die stock: M25 (1")
• 1 pc die stock: O 38 (11/2)