WÜRTH Fast-Drying Spray Adhesive 500ml
Don't like the alternatives? Choose from the full product list
WÜRTH Fast-Drying Spray Adhesive 500ml
Fast drying contact and assembly adhesive for all lightweight materials. Due to the fast drying time, the material can be loaded and processed after a very short time.
Key features of Würth Quick Drying Spray Adhesive 500 ml
- Permanently firm fixing in virtually all areas of use
- Quick-drying
- It won't spill over to the other side
- Adjustable spray nozzle
- Ideal for use in an extremely wide range of work tasks
- Silicone-free
Use
Ideal for the automotive sector, dealer workshops, cabinet and ventilation system construction, model building and industrial areas. The product can be used as a contact and assembly adhesive. The glued parts must be dry and free of dust and grease. Shake the container properly before use. Spray both bonded surfaces with an even thin layer from a distance of approximately 20-25 cm, allow to air for 5-10 minutes and then press the surfaces together. Spray on absorbent surfaces until they are saturated.
Notice
When bonding rigid foam/polystyrene, depending on the type of rigid foam, the adhesive must first be applied to a small suitable area to check compatibility and then wait at least 60 minutes for any changes or hole formation to take effect.
Warning:
Usuitable for bonding soft PVC, PVC foils and cut edges of fibreboards. After use, turn the container upside down and press the valve until the nozzle is empty.
Specifications
Type
Features
Colour
Packaging
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
