HP 1810-48G Rackmount
Switch 48 ports 100/1000 + 4 SFP ports 100/1000 (J9660A#ABB)
Show full description
Code:
TH894f1
Producer's Website:
HP 1810-48G Rackmount
Discontinued
HP 1810-48G Rackmount
Switch HP V1810-48G is designed to extend Ethernet networks in medium-sized enterprises. The series is characterized by ease of administration via the web interface, low cost and an extended warranty. Thanks making the switch fanless silent operation desired. It can be mounted virtually anywhere (wall, desk, under the desk). Allows installation in standard cabinets Rack (19 "), all for installation is supplied with the device.
Switch provides 48 RJ-45 copper ports support 100/1000 Mbit/s data transmission in a local area network and four SFP ports. The distribution of priority data flows care service Quality of Service (QoS). Standard Auto-MDIX can recognize classical and crossover cables. A comprehensive overview of the status, activity and speed of connected devices ensure a clear display with LED indicators for each port.
The device supports the sending of jumbo packets (9216-byte frame) and protection against attack CPU DoS Protection.
This product is covered by the warranty Next business day, ie. technical problem will be solved next business day on-site. Breakdown of guarantees for the individual model series, including electronic and telephonic the Support can be found here.
Specifications:
Supported network standards:
IEEE 802.3 10 Base-T
IEEE 802.3u 100 BASE-X
IEEE 802.3ab 1000 BASE-T
IEEE 802.3z 1000 BASE-X
Interface:
48 RJ-45 10/100/1000 ports (autosense)
4 SFP 100/1000 ports
Memory and processor
8 megabytes flash
Packet buffer 1.5 megabytes
64 megabytes of SDRAM
Waiting time:
At 100 Mbit/s: <8.4 microsecond (64-byte packets mode LIFO)
In 1000 Mbit/s: <3.2 microsecond (64-byte packets mode LIFO)
Capacity Routing/Switching:
104 Gbit/s
Data flow:
Up to 77.4 million packets/s
Communication:
IEEE 802.3x Flow Control
IEEE 802.1p Priority
Power requirements:
100-127/200-240 VAC; 50/60 Hz
Consumption:
60 watts
Dimensions:
44.2 x 24.77 x 4.45 cm
Weight:
2.86 kg
Safety standards:
UL 60950-1
CSA 22.2 60950-1
IEC 60950-1:2005
EN 60950-1:2006 + A11: 2009
Electromagnetic standards:
FCC Rules Part 15, Subpart B Class A
Switch provides 48 RJ-45 copper ports support 100/1000 Mbit/s data transmission in a local area network and four SFP ports. The distribution of priority data flows care service Quality of Service (QoS). Standard Auto-MDIX can recognize classical and crossover cables. A comprehensive overview of the status, activity and speed of connected devices ensure a clear display with LED indicators for each port.
The device supports the sending of jumbo packets (9216-byte frame) and protection against attack CPU DoS Protection.
This product is covered by the warranty Next business day, ie. technical problem will be solved next business day on-site. Breakdown of guarantees for the individual model series, including electronic and telephonic the Support can be found here.
Specifications:
Supported network standards:
IEEE 802.3 10 Base-T
IEEE 802.3u 100 BASE-X
IEEE 802.3ab 1000 BASE-T
IEEE 802.3z 1000 BASE-X
Interface:
48 RJ-45 10/100/1000 ports (autosense)
4 SFP 100/1000 ports
Memory and processor
8 megabytes flash
Packet buffer 1.5 megabytes
64 megabytes of SDRAM
Waiting time:
At 100 Mbit/s: <8.4 microsecond (64-byte packets mode LIFO)
In 1000 Mbit/s: <3.2 microsecond (64-byte packets mode LIFO)
Capacity Routing/Switching:
104 Gbit/s
Data flow:
Up to 77.4 million packets/s
Communication:
IEEE 802.3x Flow Control
IEEE 802.1p Priority
Power requirements:
100-127/200-240 VAC; 50/60 Hz
Consumption:
60 watts
Dimensions:
44.2 x 24.77 x 4.45 cm
Weight:
2.86 kg
Safety standards:
UL 60950-1
CSA 22.2 60950-1
IEC 60950-1:2005
EN 60950-1:2006 + A11: 2009
Electromagnetic standards:
FCC Rules Part 15, Subpart B Class A
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
