TP-LINK TL-SG1008PE

The TP-LINK TL-SG1008PE 8-port TP Gigabit Switch can be used as a desktop or rack switch, and supports data and power transfer over a single PoE+ cable. With a total load of up to 124W and a maximum of 30W per port, the switch allows you to power multiple network devices such as AP's, IP cameras or IP phones. Smarter savings technology can reduce consumption by as much as 75%. 

Each of the 8 ports will handle power via an Ethernet cable, PoE+, using the 802.3af/at standard, which can detect whether the device should be powered and automatically enable or disable the supply. The TL-SG1008PE switch can assign priority port overloads (124 watts or more) to the port priority 1, with the lowest priority being port 8. In practice, this means that if the 124 watts limit is exceeded, ports are disconnected from the lowest priority upwards.

This switch does not require any special installation and configuration. Basically. you just need to plug it in and you will have a switch that can run at up to 1Gbps at each of the 8 ports and power your devices through PoE+.

Parameters and Specifications:

Interface:
8 x 10/100/1000Mbps RJ45 port
AUTO Negotiation/AUTO MDI/MDIX

PoE Ports (RJ45):
Standard: 802.3at/af
Number of ports: 8
Maximum load on all ports: 124W
Maximum port load: 30W

Consumption:
Max. 140.1W (at max. Port load - 124W)

Dimensions:
294 x 180 x 44mm (W x H x D)

Operating Conditions:
Temperature: 0 to 40 °C
Humidity: 10 to 90%

Package Contents:
TL-SG1008PE, power cord, installation guide