Vivotek FD8136B-F2

Very small and easy to install IP camera with wide-ranging. Its biggest advantage is the support of advanced H.264 compression , Which saves storage space and provides better quality recording. In addition to the aforementioned H.264 supports popular output formats MPEG-4 or MJPEG. IP camera transmits while two streams . This is useful for broadcast in different resolutions. One example for a computer or a monitoring center and the other for access from a mobile phone .

Power over Ethernet (PoE 802.3af) offers the possibility of installing cameras only a single cable. This greatly simplifies and cheapens the installation. Camera lens You can adjust the focal length for the focus to the desired position, so personalize it to various environments. Besides offering this IP camera connect input devices Such, for example, may be an additional sensor.

With the ePTZ supports electronic pan, tilt and digital zoom. The camera also reveals tampering with a camera. When masking, rotation or other unauthorized modification can be set to immediately inform the. It may be located in areas such as offices, waiting rooms, corridors and others. For direct deposit record has a slot for a card Micro SDHC .

Specifications:

Design:
Inside

Image capture:
Sensor: 1/4 "Progressive CMOS
Resolution: 1280 x 800 pixels (25 frames/s)
Sensitivity in day mode: 0.45 Lux
Parameters shutter 1/5 ~ 1/25000 s, Gain, BLC
Video Compression: H.264, MJPEG, MPEG-4, Multistreaming

Lens:
f = 2.5 mm
F = 2
Horizontal viewing angle: 89.9 °
Vertical angle: 62 °

ePTZ:
Range of rotation: 45 °
Tilt range: 33 ° ~ 90 °
Zoom: up to 16x digitally in high

Special Features:
Micro SD/SDHC slot
Access from mobile phones
Tamper Detection
Privacy Masking

Sound:
Built-in microphone
Input for external microphone
Output for external speaker
Audio Compression: GSM-AMR 4.75 kbps ~ 12.2 kbps MPEG-4 AAC 16 kbps ~ 128 kbps

Network protocols:
IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1x

Consumption:
approximately 3.84 W
PoE 802.3af

Interface:
1 alarm input for connecting external devices (eg. PIR sensor, door contact)
1x RJ-45 (10/100 Mbps) (PoE 802.3af)

Dimensions:
90 x 50 x 90 mm

Weight:
143 g

Operating temperature:
0 ° to 50 ° C.

Packing:
IP camera FD8136W-F3
Tool for focusing the lens
Screws
Quick Installation Guide
CD with software