APC Smart-UPS 750VA LCD RM

The APC Smart-Ups 750 VA provides important data directly on the front panel due to a clear LCD display. With extra navigation keys, you can also configure the UPS conveniently. Of course, there is support for remote management of the drive through a computer network. You can also use the USB port or serial interface.

Companies looking for energy efficiency will appreciate a patented operating mode that bridges unused electrical components in good power conditions and thus achieves very high operating efficiency without any reduction in protection. The unit also shows the actual number of kW hours used, so you can easily verify the power consumption of the connected devices. The unwanted grid load then eliminates active PFC correction. Of course, there is also a high efficiency that achieves 97% at full load, effectively eliminating unwanted heating. The unit features an independent group of sockets that can be operated separately from the UPS and can be used to independently reboot the connected devices and turn the devices on or off.

Automatic Boost and Trim (AVR) provides higher application availability by correcting low or high voltage conditions without discharging the battery. You will save costs with the intelligent charging voltage control system, depending on the battery temperature, which significantly prolongs its service life. Regular battery testing ensures the timely identification of the need for replacement. The unit provides protection against overcurrent surges, spikes, lightning, and other power irregularities. It also automatically starts the connected devices after the power is restored.

Parameters and Specifications:

Exit:
Maximum adjustable power: 500W/750VA
Rated output voltage: 230V
The nominal output voltage can be set to 220, 230 or 240V
Efficiency at full load: 97%
Output voltage distortion: Less than 5% at full load
Output Frequency (Sync with Network): 57-63Hz, nominal frequency 60Hz

Output Connections:
4x IEC 320 C13
2x IEC Jumpers

Input:
Rated input voltage: 230V
Input frequency: 50/60Hz +/- 3Hz (autodetection)
Input connection type: IEC-320 C14
Input voltage range: For power supply from the grid
160 - 286V
For power supply from the grid you can adjust the input voltage range:
151 - 302V

Battery and run time:
Maintenance-free lead-sealed battery with suspended electrolyte (not flowing)
Typical charging time: 3 hours
Replacement battery: APCRBC123
Number of battery modules: 1
Runtime: Time/Run time graph

Communication and administration:
Port interface: RJ-45 Serial, SmartSlot, USB
Quantity of SmartSlot: 1
Control panel: Multifunctional LCD status and control console
Audible Alerts: Notification of battery-powered status/clear low battery/adjustable time
Emergency shutdown: optional

Overvoltage protection and filtration:
Shock energy: 459J
Filtration: Continuous multipole noise filtration/IEEE surge arrester 0.3%/zero key response time/corresponds to UL 1449

Design:
Black Colour
Dimensions: 89 x 432 x 406mm (H x W x D)
Weight: 17.27kg

Package includes:
Software CD, Documentation CD, Installation Guide, Rack Mount Supports, RS-232 Smart UPS Signalling Cable, USB Cable