Car Tools JONNESWAY – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.sk.
Continue
49
Results
Puller for pins - manual, screw length 75 mm, weight 1 kg
Puller - manual, two-armed, length 155 mm, span 150 mm, weight 1,1 kg
Car Mechanic Tools - tool for cleaning piston ring grooves, for cleaning deposits in piston grooves, equipped with three rings with blade diameters, positioning of the saw blade to the correct piston diameter is done by sliding the disc on the flat beam
Car Mechanic Tools - fixture for mounting and dismounting ohc valves, valve spring compression, weight:660 g, length of handle: 320 mm
Locking Tool - fixtures for arresting distributors renault isuzu opel peugeot
Car Mechanic Tools - Brake bleeder with 1 m hose, ending in a universal, interchangeable hose connector, Brake fluid change kit with 0.75 capacity with magnet, which prevents the container from filling with liquid, universal rubber adapter, 4 adapters with dimensions 21 - 30 mm, 24 - 32 mm, 28 - 37 mm, 32 - 41 mm, working pressure 5-8 Bar (70~110 PSI), waste container capacity 1 litre, tank capacity 0.75 litres, air consumption 160 l/min, 1/4" air connections
Car Mechanic Tools - pneumatic carving machine for carving glued car windows, three blades of size 30 mm, 35 mm and 57 mm, in a plastic case, compressed air drive, speed 22000 beats. /min, working pressure 6.2 bar, ¼" air connection, 10 mm supply hose, air consumption 260 l/min, length 120 mm, weight 1,2 kg
Car Mechanic Tools - tapping file for metric threads, for regeneration of damaged internal and external threads, for a gradient of 0.80, 1,00, 1,25, 1,50, 1,75, 2,00, 3.00 mm
Car Mechanic Tools - 1/4" separator, drain valve, maximum filtration: 60 micron, protection against airborne pollutants, gun connection: 1/4" female thread, connection for quick coupling: 1/4" male thread
Car Mechanic Tools - professional equipment for crimping thin-walled steel, aluminium and copper hoses with diameters of 3/16" (4, 75mm) and 1/4" (6mm), SAE system, the device is designed for connecting hoses externally, internally, EQUIPMENT - Press - Handle - 2-piece punch 3/16" (4, 75 mm) - 2-piece 1/4" (6mm) punch - 3/16" (4, 75mm) outside-inside- Punch 1/4" (6 mm), external-internal- pressure roller punch
Puller - hand-held, double arm, length 160 mm, weight 2,67 kg
Car Mechanic Tools - a tool (wrench) for removing the fuel tank nuts, range 122 - 199 mm, square for 3/8" grip, universal, for most European vehicle types, e.g. Mercedes-Benz, Audi, BMW
Car Mechanic Tools - tester to check the functionality of the seals under the engine head, to diagnose a cracked engine head, a cracked engine block or a damaged head gasket, the instrument allows easy diagnosis and quick damage detection, The principle of operation of the instrument is based on the measurement of the co2 content in the cooling system, the reaction liquid in the tester chamber reacts with the gases contained in the cooling system, and if the co2 concentration is elevated, the liquid changes colour, dual chamber design (with filter between chambers)
Car Mechanic Tools - Set for pearling and shaping pipe ends 4-14mm
Kit - hooks and spikes for pulling out bearings, o-rings
Car Mechanic Tools - Impact socket XZN, size M 18, length 60 mm - JONNESWAY S16A4118
Car Mechanic Tools - Wrenches for lug nuts Jonnesway 6pcs 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm, Contents of the set: 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Car Mechanic Tools - cutting machine, for shortening pipes, for copper pipes with a diameter of 4-28 mm, with a knife for aligning sharp edges, silver and black colour, weight 300 g
Chcete doručit do České republiky? Jdi na
Nářadí na auto