CTEK MXS 7.0

Cold winter evenings, when your car's battery starts to feel the chill, are coming soon. A fully charged battery is a prerequisite for easy car starting. If you are not sure about the state of your car battery, which is critical to your vehicle, then it's a good idea to buy a charger that works properly. This product from CTEK ranks among the highest quality chargers with microprocessor charging control. So you can safely leave all your battery worries behind.

Key features

• It has a stable charging current up to 7A
• It works to restore deeply discharged batteries
• It's for 12V batteries with a capacity of 14 to 150Ah, up to 250Ah for maintenance charging
• It meets the IP65 protection class standard
• It comes in a compact size

Easy connection

The package includes a connector with terminals so you can quickly connect to the battery. This is perhaps most practical for all those looking for a fast and easy solution on a combination of different batteries, for example in a workshop. Its optimal length and colour resolution is also great and always provides a flawless connection.

Under the supervision of the microprocessor

This universal battery charger is microprocessor-controlled. It is also equipped with patented eight-phase charging technology. When charging is complete, the charger automatically switches to maintenance status, thereby avoiding overcharging and subsequent damage to the battery. The charger is designed for all types of 12V lead-acid batteries. You'll certainly appreciate the Supply function, which is a power mode that provides power at the time between removing and re-connecting the battery. By disconnecting the battery from the vehicle, you risk losing all your settings, including alarm codes, multimedia system settings and other electronics that control the power of your vehicle. This charger is capable of bringing life back to deeply discharged batteries with a stratified electrolyte. 

Warning

• In order to charge in Recond mode, the battery must be disconnected from the electrical wiring system and the battery must be charged outside of the vehicle. This is a mode in which controlled electrolyte mixing occurs and the device charges the battery at a higher voltage than other modes. 
• Recond mode cannot be used for batteries with Gel Electrolyte (AGM)
• It is recommended to use only on deeply discharged batteries in which electrolyte stratification has occurred (thick on bottom, thin on top). This mode should be used only once, or at most twice, per year.
• If it is not a maintenance-free battery and it has an open lid, then it is necessary to leave the lid open during charging.

Additional information:

Battery types:
All types of 12V lead-acid batteries (Wet, MF, Ca / Ca, AGM and GEL)

Dimensions:
191 × 89 × 48mm (L×W×H)

Insulation class:
IP65

Weight:
0.8kg