Dobrý deň prajem, moja otázka znie, zariadenie pracuje aj na operačnom systéme windows 10? Ďakujem.
Adapter for connecting SATA disks and drives
The AXAGO CLONE adapter ADSA-3S is a unique device that allows simultaneous connection of up to three SATA disks to a computer via one USB port. You can connect the two disks directly to the connector on the adapter body and simply connect the third disk with the supplied cable.
A great choice for users with many disks requiring quick connection and usage. Ideal for connecting 5.25" optical drives.
This photo is disabled from the colorbox and will not be displayed in it.
Smart design
This photo is disabled from the colorbox and will not be displayed in it.
3 connected disks at simultaneously
Can handle up to three at the same time
Another extraordinary feature is the ability to clone the contents of the connected disks without the need to connect to a computer. The adapter can be used as an autonomous device for comfortable disk image creation, even on two disks at the same time. The One Touch Backup allows for convenient backup by pressing a single button.
Input interface:
1 x USB 2.0
Device support:
Ports: 3 x SATA
Format: 2.5" HDD, SDD, 3.5" HDD, 5.25"
Power supply:
external power adapter 12V / 5A
Properties:
Fully compatible with USB 2.0 and backward compatible with USB 1.1
Support for 12 / 480Mbit/s transfer speed (full / high speed)
Designed for 3.5" and 2.5" SATA I, SATA II and SATA III disks of all capacities and all sizes
Complies with the Serial ATA revision 1.0 specification
Max. theoretical data rate of 1.5Gbit/sec (SATA / 150)
Support for SATA II Asynchronous Signal Recovery (Hot Plug)
Connecting to a PC via an adapter fixedly attached to a USB 2.0 cable with A male connector
The adapter includes the following interfaces:
2 x combined data + power SATA connector for direct SATA disks connection
1 x combined data + power internal SATA connector for connecting a third SATA disk via SATA cable (cable included in the package)
3 x LED indicating the activity of each disk
Power switch with LED status indication
Power supply:
Via an external 12V-5A AC/DC adapter designed to power up to three 3.5" drives, with a 150cm lead cable. 2-pin 90cm power cord.
One Touch Backup function:
The One Touch Backup function allows you to back up your data from a PC by simply pressing the button on the adapter. After installing the application from the supplied CD, you can define any directories to back up at the first startup and then just press the button to back up that data to a disk attached to the adapter
Disk cloning functionality:
The cloning takes place without attaching the adapter to your computer.
The target disk must have the same or larger capacity as the source disk, otherwise cloning can not be started.
The source disk is connected to the direct connector labelled SATA I.
The target disk or disks are connected to SATA II or SATA III connectors.
When two target disks are connected, cloning the source data takes place simultaneously on both disks.
The cloning is triggered by pressing and holding the cloning button for min. 5sec.
During the duplication, the LEDs are indicating the disk activity.
More information:
Body dimensions of the adapter 68 x 78 x 22mm
Adapter weight 91g
Supported Operating Systems:
MS Windows XP / Vista / 7 / 8 / 8.1 and later, Windows Server 2003 / 2008 / 2012 and later (supported by all 32 and 64-bit versions of Windows), Mac OS X 10.4 and later, Linux with kernel 2.4.x and higher. The One Touch Backup application is compatible only with Windows operating systems.
Note: The drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed and are not available.
Package contents:
CLONE adapter with 80cm USB cable, combined data + 15cm power supply SATA cable, AC adapter, power cord, CD with One Touch Backup app
