AXAGON HUE-SA7SP 7-Port USB 3.0 CHARGING Hub

7-port USB 3.0 hub AXAGON HUE-SA7SP ALU CHARGING with its own power supply and fast-charging support on all USB ports. The compact hub with a durable aluminium casing connects up to seven USB devices to the computer. At the same time, it can recharge mobile phones/tablets/power banks and other devices an electric current of up to 2A due to a USB Battery Charging 1.2 support. It can even connect multiple external drives. A fixed USB cable has a length of 40cm. A compact 5V/2A power adapter is included in the package.

Input:
1x USB 3.0
 
Ports:
7x USB 3.0

Properties:
7 downstream USB 3.0 ports with enough space around the connectors.
An upstream USB 3.0 port with a USB 3.0 type-A male connector on a fixed 40cm long cable.
Compatible with USB 3.0, backward compatibility with USB 2.0 and USB 1.1.
Supports 1.5/12/480/5000 mb/sec (low/full/high/super speed) data transfer rates.
Supports USB Battery Charging 1.2.
Each hub port can be used to charge devices with a current of up to 2A.
It is possible to connect your device while running due to Hot Plug support.
Full Plug-and-Play support.
LED indication of hub connection to a power supply.
Current overload detection and protection.  

Hub Power Supply Mode via USB Cable (Bus Power):
Power supply via the USB interface is sufficient enough to connect a low-consumption USB device (mouse, keyboard, card reader, flash drive, etc.) or a device with its own power supply (printer, scanner, 3.5" external drive) to all seven ports.
The USB hub can also power up to 2 magnetic 2.5" external drives in this power mode, and up to 3 drives when connecting them one by one.
Charging mobile devices (except for iPad) is also possible in this power mode, however, the charging current only reaches max. 0.9A.

Self Hub Power Supply Mode via an Included Power Adapter (Self Power):
Power supply via an included AC/DC adapter (input: 100-240V~, 50/60Hz, 0.45A, output: 5V-2A/10W, 2-pin euro plug, coaxial output connector with a 3.5/1.3mm diameter, 150cm cable).
The USB hub in this power mode can handle up to 4 magnetic 2.5" external drives. However, for a long-term reliable operation of the hub, we recommend using max. 3 magnetic external 2.5" drives simultaneously.
Mobile devices quick-charging (including iPad) with up to a 2A current in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the power adapter to max. 2A.

Single charging hub mode without charging hub:
After shutting down the connected computer or without connecting to the hub computer, it works with the AC / DC adapter supplied as a separate rechargeable USB hub.Mobile devices quick-charging (including iPad) with up to a 2A current in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the power adapter to max . 2A.

More information:
Hub dimensions 156 x 30 x 21 mm, AC adapter dimensions 29 x 75 x 80 mm including fork. Weight of hub 91 g (incl. cable), AC adapter weight 97 g (incl. Cable).

Supported Operating Systems:
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.4.X and higher, Linux with kernel 2.6.X and higher.
Note:: Drivers are included with supported operating systems and installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
USB 3.0 hub with fixed cable 40 cm long. Power adapter. The installation procedure and product parameters are listed on the box.