AXAGON PWB-A10 ALU 10000

Power Bank AXAGON PWB-A10 ALU POWER BANK is a universal charging device with two outputs and a capacity of 10,000 mAh for charging mobile devices on the go. The energy stored is enough to allow multiple charging of current smartphones or tablet that you might have at home or at work or even on the go. This Li-polymer external battery is built into the exclusive - thin and durable aluminium body with a nice matte finish preventing unwanted fingerprints or accidentally slipping out of hand.

Cell Li-ion battery is recharged directly from the USB port on your computer or USB charger via the included USB cable. Such as heart Power Bank used the premium Li-polymer cell for superior efficiency of approx. 95% (at a discharge current 0.5A), approx. 90% (at 1A) or 87% (in 2A). Fast charging of connected devices (up to 2.1A output) and external batteries (input up to 2A) saves you time. Intelligent electronics protect the battery against all adverse influences.

Designed for charging tablets, mobile phones and smartphones, cameras, navigation systems, gaming consoles and other devices that support the power from the USB port.

Battery capacity:
10,000 mAh/3.7 V, ie. 37 Wh
Li-pol battery

Login:
DC 5V/2A
micro USB connector 5pin

Output:
Two outputs 5V DC/1A and 5V DC/2.1A
with type A USB connectors for charging two devices simultaneously

Function electronic control external battery:
overload protection
short circuit protection,
protection against spikes,
protection against excessive discharge,
protection against overcharging
automatic switching between battery for convenient display and saving of energy saved.

The typical time during which the charging is completely depleted external battery:
approx. 6 hours from the net USB charger with min. 2A output (not included)
approx. 10hrs from a USB PC port.
at least 500 charging cycles durability (min. 80% of the original capacity)
700 cycles projected durability (subject to the conditions of use of the battery).

LED indication:
Four subtly illuminated blue LEDs,
After pressing the four LEDs to indicate battery level 100-75-50-25%
automatic shutdown of LED indication after a few seconds,
when you connect an external battery input to USB power port, the LEDs indicating ongoing charging process illuminate.

Additional information:
Aluminium body rigidly connected with the body made of resistant ABS plastic.
Dimensions: 135 x 78 x 19mm.
Weight: 283g.
Operating temperature: 0 ~ + 40°C, storage temperature: -20 ~ + 60°C, Humidity: 20 ~ 85%.

Package contains:
10,000mAh battery
Cable USB power adapter type A-M/micro 5pin length 15cm
multilingual manual ENG/CZ/DE/ESP/FR/HU/IT/PL/RO/RU/SK/BG.

Please note: The actual (physical) capacity of the battery cell is 10.000mAh. Practically, however, it is not possible to wirelessly transfer all this power from an external battery to the mobile device battery. The loss of power always arises in the necessary voltage converter device that converts the voltage from 3.7V to 5V, on the voltage transition contact resistances, by less than 100% efficiency of energy storage in the charged battery, due to temperature conditions, due to higher charging amperage etc. Due to its use of modern Li-polymer cells and advanced electronics, it is possible to move energy from the external battery to the charged battery with superior efficiency between approx. 95 and 87% depending on previously mentioned conditions.