BISON POLY MAX Crystal Express 300g

Bison Poly Max Crystal Express is a unique and universal solution not only for gluing, but also fixing and sealing. It is a clear and quick-drying assembly adhesive that achieves handling strength after only 30 minutes, and very high final strength after 4 hours. It is suitable for use in interiors and exteriors and for all types of absorbent and non-absorbent surfaces. It even adheres very well to slightly damp surfaces. The created joint is permanently elastic, does not shrink and absorbs vibrations well. In addition, it is resistant to moisture, water, weather, chemicals and UV radiation. It is also recoatable with acrylic and alkyd paints. The all-in-one Bison Poly Max Crystal Express adhesive on ms-polymer technology does not contain solvents or acids and is completely odorless. Suitable for professionals.

Key properties of Bison Poly Max Crystal Express 300 g

• Revolutionary all-in-one glue not only for gluing, but also fixing and sealing
• Bison Poly Max Crystal Express is clear and quick-drying
• Handling strength after 30 minutes, final strength after 4 hours
• Suitable for interior and exterior
• Bonds absorbent and non-absorbent surfaces, including slightly damp
• The joint is elastic, does not shrink and absorbs vibrations
• Resistant to weather, water, humidity, chemicals and UV radiation
• Recoatable with acrylic and alkyd paints
• Bison Poly Max Crystal Express is solvent, acid and odorless

Suitable for gluing and assembly:
PVC, ABS, metals, stones, glass, different plastics for different materials, such as metals, plastics, glass, marble, calculus, plexiglass, stoves, etc., also mirrors for smooth surfaces and bonding of expanded polystyrene to metals (eg insulation of garage doors), for paving, tiling, etc.

Instructions:
Bonding and fixing: Bonded surfaces must be dry and dust-free. Apply the adhesive on one side in dots or strips and press together. For heavy materials, fix the glued parts for 2 hours. The joint reaches full strength after 4 hours. The condition is that at least one material must be porous. Glued parts can be corrected for a few minutes. Uncured adhesive can be removed with a wet cloth.

Seal: Apply the sealant evenly to the joints. Smooth with a damp (lemon-free detergent water) within 10 minutes with a spatula, spatula or finger. Seal vertical joints from the bottom up. The surface is dry in about 15 minutes. Complete curing occurs after a few days (depending on the thickness). The curing speed is approximately 2 mm / 24 hours.

Temperature resistance:
from -40 to +100 ° C

Yield:
5 - 8 m²/kg

Warning:
Use in the range of 5 to 40 ° C. Shelf life 18 months in a cool and dry place. The glue must not freeze. If you overpaint the joint, always test the effect of the colours first. Alkyd paints can slow down the joint injury time.