D-Link DGS-3627G

Catalogue
D-Link DGS-3627G
Switch
Code:  NN311q5 Product Number:  DGS-3627G Producer's Website:

Don't like the alternatives? Choose from the full product list

D-Link DGS-3627G

Switch D-LINK DGS-3627G is part of a family L3 Gigabit Switch D-Link xStack that represent a combination of performance with robust security, QoS (Quality of Service), versatile management functions, Redundant power supply options and ease of expansion.With its 24 SFP slots provides all-optical environment for large Ethernet infrastructure.It is particularly suitable for telecom service providers, which can form the basis of their optical network nodes installed in individual buildings and expand the coverage area.For greater flexibility are built four 1000Base-T copper ports that serve as ports with 4 combo SFP slots.

Several DGS-3627G switch can be connected to the physical stack using cheap 10gigabitových CX4 copper modules.In this configuration, it is possible to create one or two 10-Gigabit uplinks, depending on whether it is implemented linear or lunge tolerant ring stacking.This way you can create a stack of up to 12 switches.Using inexpensive coaxial cable for stacking switches enables not only broadband but also flexible stacking 10gigabitových adding uplinks exactly as needed.Three open slots can also be used for 10-Gigabit XFP fiber uplinks to servers or backbone connection.

With D-Link Single IP Management (SIM), you can connect up to 32 switches (regardless of model) to the virtual stack.Group of switches can be configured, monitored and managed through a single IP address from any workstation with a web browser.Stack is operated as a single object and all stacked units are identified by a single IP address.Simple but powerful web interface, allowing administrators to perform most tasks for configuration and management.

For a secure connection and access control is a complete set of security features.These include access lists (Access Control List-ACL) based on MAC address, switch port, IP address numbers, or TCP/UDP ports.The switch supports 802nd1X authentication via TACACS + and RADIUS.In addition, this switch is able to deploy a firewall in cooperation with the D-Link NetDefend automatically block each host that exhibits unusual behavior.This mechanism, called D-Link ZoneDefense ™, provides proactive network security by preventing the spread of the virus through the network and thwarting attacks on Network1.

The DGS-3627G switch supports VLAN functions using GARP/GVRP, 802nd1Q and Guest VLAN to enhance network security and performance.Guest VLAN function dynamically classifies users into "VLAN host" if a user is not logged on to the RADIUS server.Bandwidth control allows administrators to set bandwidth limits for each port to ensure the required level of service for end users.Unique features D-Link Safeguard Engine allows administrators to configure thresholds that limit the influence of extreme network load caused by the usual and virus/worm on the CPU switch.This increases reliability, serviceability and availability switch.

Specifications:

Interface:

24 SFP slots
4 1000Base-T Gigabit copper ports (acting as combo with 4 of the SFP slots)
3 open slots for 10-Gigabit uplink modules
Console port (RS-232)

Performance:
Switching field: 108 Gb/s
Optional redundant power supply

Integration into the stack:
Up to 12 units per stack
Virtual stack of up to 32 units
Management via a single IP address (D-Link Single IP Management - SIM)

Security:
/> L2/L3/L4 multi-layer Access Control
Support for external authentication via RADIUS/TACACS
802nd1X Guest VLAN
Support for SSH/SSL
The control in IP-MAC binding (IP-MAC binding)
Control by binding IP-MAC-port (IP-MAC-port binding)
Access control by the web address (Web-Based Access Control - WAC)
Access control by MAC address (MAC-Based Access Control - MAC)
Protecting ZoneDefense in conjunction with firewalls D-Link NetDefend
D-Link Safeguard Engine
Support Microsoft NAP
functionality available in an upcoming firmware update

VLAN:
802nd1Q/802.1v
Double VLAN (Q-in-Q)
GVRP
Guest VLAN

IP routing:
RIP v1, RIP v2, OSPF v2, passive interface, NSSA
IP Multicast IGMP v1/v2,/v3, DVMRP v3, PIM Dense Mode for IPv4, IGMP/MLD Snooping
IPv4/v6 static and dynamic routing

Quality of Service (QoS):
802nd1p Priority Queues/Multi-Layer CoS
Bandwidth management for port/data flow (increments 64 kb/s)

Traffic Monitoring:
Traffic Segmentation
Broadcast/Multicast storm control (increments of 1 packet/s per port)
Port trunking (802nd3AD Link Aggregation - Port Trunks)
Graphical interface for traffic monitoring
Support RMON and sFlow
Port mirroring

Configuration/Management:
Configuration and management via web interface
Command Prompt (Command Line Interface - CLI)
SNMP v.1, v2c, v.3
Delivered module for network management D-View SNMP
Telnet server
The two versions of firmware/configuration (Dual images/configurations)


Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for D-Link DGS-3627G Chcete doručit zboží do Česka? Prohlédněte si D-Link DGS-3627G. Für Versand nach Deutschland, besuchen Sie bitte D-Link DGS-3627G. Für Versand nach Österreich, besuchen Sie bitte D-Link DGS-3627G. Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: D-Link DGS-3627G.
P-DC1-WEB17
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me
We care about your privacy Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
More information Less info