D-Link DXS-3350SR Layer3, 48x GbE port, 2x 10GbE port, 4x Mini GBIC, VLAN s GARP/GVRP 802.1Q, VRRP,

Professional switch supporting 10/100/1000 Mbps ports, Gigabit copper cabling and Gigabit SFP optical cabling.Uplink offers up to 10 Gbps.Of course the administration through the web interface, complete RMON monitoring and the creation of protocols for the operation, support for Telnet and CLI via console port.

All switches D-Link DXS-3226GSR/DXS-3250SR are equipped with 2 stacking ports, providing a bandwidth of 20Gb/s in full duplex.Can stack up to 6 DXS-3226GSR/DXS-3250SR switches to obtain the total bandwidth of 120GB/s.Star stacking provides resistance against failures and the switches can be added or removed without interruption of the stack.Switches to connect to the stack using high-speed stacking cables, enabling the entire stack has worked as a high-performance unit.

They are stackable on the 3rdlayer with high density of ports that combine high performance with resistance failures, security, manageability features, flexibility and ease of use.All of these properties, usually much more expensive chassis-based solutions, at a cost stackable design!

Whether you want to connect your business computer or just a normal gigabit speed 10/100Mbps D-Link DXS-3226GSR/DXS-3250SR always has the right solution that meets your needs with the appropriate type of ports, their density and uplinkům.Scalability and flexibility allows you to connect various devices 10/100Mbps and 10/100/1000Mbps Gigabit Ethernet units in line with your requirements for network traffic.

D-Link switches DXS-3226GSR/DXS-3250SR provide up to 28 Gigabit ports on one switch with a low profile 1-U cases for mounting in a rack.You can get up to 312 Gigabit ports in a star architecture, or a maximum 336 Gigabit ports in a stack in a circular topology.This high port density allows you to deploy DXS-3226GSR/DXS-3250SR as a central switch or as an easily extensible stack for Gigabit applications.

DXS-3226GSR/DXS-3250SR simplifies and speeds up network management, because it allows to configure, monitor and manage multiple switches from any workstation running a Web browser via a single IP address.The stack can be managed as a single object and all units in the stack are determined by one IP address.Simple but powerful web interface allows you to perform most administration tasks and configuration and eliminates the need to install expensive and complex software management via SNMP.

Parameters and specifications:

Bandwidth:
Full duplex mode
Supported degree 10/100/1000 Mbps data transfers
Two 10-Gigabit ports - each supports up to 20Gbps (Full Duplex)

Network Connection:
Address table size:16,000 items

Management features:
802nd Management Platform1x, Bandwidth Control, Broadcast Storm Control, support for IGMP Snooping v1/v2/v3.

Protocol:
Management protocols console CLI, telnet, web, SNMPv1/v2/v3, RMON, TFTP, Port Mirroring, BootP, DHCP

Tilslutning:
Installed ports:48 ports, Dual 10-Gigabit Stacking Ports
Connectivity Technology:8 Units Per Stack (Ring Topology in)
Rear RJ-45 - 10BASE-T, 100BASE-TX \u0026amp; 1000BASE-T
Dual 10-Gigabit Stacking Ports

Power:
Maximum power consumption:147 Watt
Power requirements:100-120, 200-240VAC, 50/60 Hz

Certificates:
Safety CSA International

Conditions:
Operating temperature range 0 - 40 ° C
Storage temperature range (TT) -25-55 ° C
Operating relative humidity 5-95%

Weight and dimensions:
Installing the rack:Yes
Dimensions (WxDxH):445 x 430 x 45 mm
Weight: