ELIZ EHT 3.5

Catalogue
ELIZ EHT 3.5
1.6 9 rating
Water heater - pressure, power consumption 3,5kW, voltage 230V, energy efficiency class A, suitable for placing e.g. over sink
Code:  ELBO057 Lifetime 6 months Product Number:  3277

Don't like the alternatives? Choose from the full product list

Flow Water Heaters Flow Water Heaters Flow Water Heaters ELÍZ Flow Water Heaters ELÍZ

 
ELIZ EHT 3.5 Discontinued

ELIZ EHT 3.5

Průtokový ohřívač ELÍZ EHT 3.5 se řadí k ohřívačům s tlakovým provozem a hydraulickým spínáním. It is designed for one point of use only. You will appreciate its versatility. It can be installed above or below the sink or kitchen sink. It is adapted for 360° installation. Its outlets can be rotated both horizontally and vertically. Although it is a pressure heater, it is not important whether you mount it on a pressure or non-pressure tap. The heater is supplied with an economical perlator insert with a flow rate of 2 litres per minute. The power cable is 0.7 metres long.

Key features of the ELÍZ EHT 3.5 flow heater

  • The ELÍZ EHT 3.5 flow heater belongs to the pressure-operated heaters with hydraulic switch
  • It is designed for a single point of use
  • It can be used above and below the sink
  • 360° installation possible
  • Works with both pressurised and non-pressurised batteries
  • Minimize heat loss with the ELÍZ EHT 3.5 flow heater

Connecting the ELÍZ EHT 3.5 flow heater

The ELÍZ EHT 3.5 instantaneous heater can be connected under the washbasin to a conventional washbasin tap. Při zapojení nad umyvadlo jej můžete osadit přímo na kteroukoliv dřezovou baterii s roztečí vývodů 30 mm. The ELÍZ EHT 3.5 is not suitable for connection to a shower. It is suitable for wall mounting. Its weight is 1.5 kg. You can rely on the safety of operation thanks to the thermal overheating protection with reset function and the IP25 protection rating. The heater can withstand pressures up to 1.0 MPa.

Minimum heat loss

If you install the ELÍZ EHT 3.5 flow heater directly at the point of use, the pipelines will be very short and you will completely eliminate heat loss. The water is heated only when the water is flowing through the heater, so the power is only drawn during the water start-up. The ELÍZ EHT 3.5 flow heater is equipped with a light which always lets you know if the heater is in operation.

Parametry:
Water outlet: G 3/8" M

Rozměry:
186 × 135 × 87 mm

Specifications

Energy efficiency class
A Done!
Power Consumption
3.5 kW Done!
Coverage
IP25 Done!
Suitable for
Sink Done!
Type
Pressure Done!

Features

Energy efficiency class
A Done!
Power Consumption
3.5 kW Done!
Coverage
IP25 Done!
Suitable for
Sink Done!
Type
Pressure Done!
Fuse
16A Done!
Voltage
230V Done!
More Specifications

Specifications can be changed without notice. Images are for illustrative purposes only.

Dobrý den, po instalaci ohřívače bez perlátoru kontrolka ohřevu svítí, ale teče studená voda. S perlátorem se kontrolka nerosvítí. (ovládání průtoku nepomohlo). Je výrobek vadný nebo dělám někde chybu? Děkuji za odpověd.

Customer,
06. 03. 2022,
1 answer
Reply

Dobrý den, máte prosím nějaké bližší info k tomuto ohřivači díky

Customer,
21. 07. 2021,
2 answers
Reply
Questions and answers: ELIZ EHT 3.5
Accessories for ELIZ EHT 3.5
Chcete doručit zboží do Česka? Prohlédněte si ELÍZ EHT 3.5.
P-DC1-WEB08
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me
We care about your privacy Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
More information Less info
I understand Detailed settings Reject everything