Zalman CNPS9500AM2
Don't like the alternatives? Choose from the full product list
Zalman CNPS9500AM2
Discontinued
Zalman CNPS9500AM2
Precision radiator with a bright chromovým surface for processors with a cap Socket 754, 939, 940 and AM2.It is created from thin slices, and they are reached large cooling surface 3698 cm 2 for heat removal.This structure is supplemented by three heatpipe tubes, which formed a special thanks to paying twice more heat than is normal for other coolers with this technology.Using an outstanding fan of the size of 92 mm is guaranteed the lowest possible noise, which ranges from 18 to 27.5 dB.With the governor delivered FAN MATE 2 can set speed ranging from 1350 to 2600 RPM.Fan is made of translucent plastic, and it has given green light diode.Stylově to complement your computer and excelling in the use of transparent boxes with bočnicí.The packages are all necessary components for installation on supported basic types of boards, including teplovodivé pastes and the governor said.Cooler is the weight of 530 grams, in the handling of a computer is required greater caution and for its installation is recommended to use a computer cabinet larger dimensions.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Dimensions:
Cooler:85 x 112 x 125 mm
Fan:92 mm
Speed:
1350 - 2600 rev./ min.± 10%
Noise:
18 to 27.5 db ± 10%
Material:
Copper
Electrical:
Power:12 volts, 3 pin connector
Weight:
530 g
Supported processors:
Socket 754 / 939 / 940 / AM2
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Dimensions:
Cooler:85 x 112 x 125 mm
Fan:92 mm
Speed:
1350 - 2600 rev./ min.± 10%
Noise:
18 to 27.5 db ± 10%
Material:
Copper
Electrical:
Power:12 volts, 3 pin connector
Weight:
530 g
Supported processors:
Socket 754 / 939 / 940 / AM2
Note:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
