GIGABYTE EP45T-UD3R

Top motherboard designed for Intel platform with support for DDR3 memory modules.The foundation plate is the Intel P45 Express chipset (Intel ICH10R), which supports the system bus on the bar to 1,600 MHz.For the extension will be PCI Express x16 slot designated for graphics card, three PCI Express x1 slots and three conventional PCI slots.Directly to the motherboard is integrated osmikanálová sound card and Gigabit network card with RJ45 connector.The connector fittings, including, for exampledigital audio output, a total of up to 12 USB ports or FireWire interface.

And specifications:

Supported Processors:
Intel Core 2 Extreme / Intel Core 2 Quad / Intel Core 2 Duo / Intel Pentium Extreme Edition / Intel Pentium D / Intel Pentium 4 Extreme Edition / Intel Pentium 4 / Intel Celeron
Cap:LGA775
Support for 45 nm processors

Chipset:
Intel P45 Express
Intel ICH10R

The system bus:
1600 / 1333 / 1066 / 800 MHz

Memory:
4 x 1.5 V DDR3 DIMM, max 16 GB
red "> DDR3 2200 / 1333 / 1066 / 800 MHz
Support Dual channel

Expanding slots:
1 x PCI Express x16 slot
3 x PCI
3 x PCI Express x1

Hard drive controllers:
8 x Serial ATA 3GB / s (support RAID)
1 x IDE ATA-133/100/66/33

Audio:
8-channel High Definition Audio Realtek ALC889A
Support for S / PDIF

Network card:
1 x Realtek 8111C (10/100/1000 Mbit)

Inputs and outputs:
2 x PS / 2
8 x USB 2nd0 / 1.1
1 x SPDIF optical
1 x SPDIF coaxial
2 x IEEE 1394a
1 x RJ45
6 x Audio I / O

Interface on the board:
2 x USB 2nd0 / 1.1 (4 USB connectors)
1 x IEEE 1394a
1 x Parallel port
1 x serial port
1 x S / PDIF input
1 x S / PDIF output

Power supply:
1 x 24 pins ATX
1 x 8 pins ATX 12 V

The size of plates:
305 x 244 mm, ATX