GIGABYTE G1.Guerrilla

Most affordable model in the new series of motherboards higher category G1-Killer for enthusiast and professional players.Model G1.Guerrilla boasts a fresh design (South Bridge heat sink shaped container with a protruding hub etc.), Great equipment and a number of unique technology improves the sound experience, network connectivity and processing power.Compared to the highest model has "only" 3 PCI Express 2nd0 x16 slots, allowing connection of up to three graphics cards in CrossFireX mode ATI or NVIDIA SLI.Another difference is then half the number of power phases for CPU (8) and the smaller size PCB (ATX).From the middle of the model differs only other sound chip and the associated lack of DTS Connect.

When installing the processor will be available socket LGA 1366, which supports the increasingly powerful desktop models of the Intel Core i7-980X and i7-970 with six cores and a huge L3 cache memory.The original system bus FSB (Front-Side Bus) was replaced by an innovative QPI (QuickPath Interconnect) which connects the processor with the north bridge chipset Intel X58.Powerful northern bridge with support for up to 36 PCI Express 2nd0 lines provided using 2 PCI Express 2nd0 slots with full bandwidth with a throughput of up to 8 GB/s to 16 lines.These two native x16 slots can be used for simultaneous connection of two graphics cards or take advantage of all 3 PCI Express x16 connection for 3 cards with x8 bandwidth on each slot.

The north bridge is bus DMI (Direct Media Interface) connected to the Intel ICH10R south bridge, which natively supports 6 SATA II controllers with the option of using RAID 0/1/5/10 configuration.Pleased with external Marvell 88SE9182 controller, which brings two more SATA connectors this time the third generation of double data transfer speed of 6 Gbit/s.With support for hybrid technology, dual EFI BIOS can boot from hard drives with a capacity of 3 TB.

Staffed by a processor will be able to use the power 8fázové with Dual CPU Power, which allows phase separation into two sets of working in tandem.One set of power phases to rest while the other set will be active.The advantage over traditional power structure, when all phases are still active, is effective in increasing the resistance power and stability demanded by first-class gaming systems.Processor can make the company up to 6 memory modules in the 3 channel DDR3 involvement of a maximum frequency of 2200 MHz.For the cooling system will have a total of 5 so-calledSmart Fan connectors strategically located to best fans paid their waste heat.

The integrated audio system board utilizes X-Fi Xtreme Fidelity and EAX Advanced HD fifth0, which provide for a sound game perks as in the real world.The high quality of spatial reproduction, is also high value of signal to noise ratio 108 db.An interesting feature is the built-in amplifier front headphone output, which works with an impedance to 150 ?, which allows players to enjoy a fuller range of dynamic sound with less distortion when using professional-quality headphones.

Designers in the creation of boards and think to online gaming, it's no wonder that its equipment includes Gigabit network card in the form of so-calledKiller E2100 NPU (Network Processing Unit) chip units with 1 GB of dedicated DDR2 memory and support exclusive Game Networking DNA technology.The resulting network platform will provide the best possible gaming experience for online gaming, it promises up to 10 times faster performance, which will give you the necessary edge over competitors not only in FPS action.The rear panel is poised classic set of USB 20 and the third0 ports, audio connectors, including digital S/PDIF.For extras can be considered as two eSATA connectors and a button for overclocking CPU.

Specifications:

Supported processors:
Model:Intel Core i7
Base:LGA 1366

FSB (QPI)
4.8 GT/s, 6.4 GT/s

Chipset:
North Bridge:Intel X58
South Bridge:Intel ICH10R

Memory:
Type:DDR3
Slot:6x DIMM
Frequency:800/1066/1333/2200 MHz
Connection mode:Triple/dual-channel
Max.capacity:24 gigabytes
Support for XMP (Extreme Memory Profile) modules

Video:
The need for a separate graphics card
Support 3-way ATI CrossFireX involvement
Support 3-way NVIDIA SLI connection

Audio:
Realtek ALC889
8 channels
X-Fi Xtreme Fidelity
EAX Advanced HD fifth0

LAN:
Bigfoot Killer E2100
10/100/1000 Mbit/s

Expansion Slots:
2x PCI Express x16 (at x16 mode)
1x PCI Express x16 (x8 mode)
2 x PCI Express x1
1x PCI

Internal interface:
2x SATA III (6 Gbit/s RAID 0/1)
6x SATA (3 Gbit/s RAID 0/1/5/10)
1x USB third0 connector (2 additional USB thirdPorts 0)
3x USB 20 connector (6 additional USB 2Port 0)
1 x S/PDIF output connector

External interfaces:
2x PS/2 (mouse, keyboard)
2x USB third0
4x USB 20
2x combo eSATA/USB 20
1x RJ-45
6 x audio jacks
1x Optical S/PDIF
1 x coaxial S/PDIF

Power:
1x ATX 24pinový
1x 8-pin 12V connector

Design:
ATX

Dimensions:
30.5 x 26.3 cm