Dobrý den, je potřeba topidlo nějak speciálně instalovat, nebo stačí strčit do zásuvky? Děkuji
ELÍZ EL 3000 INV WIFI
Convector - heating power 3000 W, wall-mounted, timer, power regulation, temperature regulation and Smart, heats a room with a volume of 80 m3, dimensions: 43,4 × 156,6 × 5,9 cm (H × W × D), white colour
Show full description
Code:
ELITO200
Don't like the alternatives? Choose from the full product list
- Reviews 3
- Help and manuals 5
- Specifications
- Photos & Videos 6
- Alternatives 8
- Accessories and suggested products
ELÍZ EL 3000 INV WIFI
Discontinued
ELÍZ EL 3000 INV WIFI
Thanks to its features, the ELÍZ EL 3000 INV Wi-Fi wall convectors are ideal for heating your home or office. The convector is able to perfectly heat a room up to 32 m² with a power setting of 3000 W. Heating is provided by a long-life stainless steel heating element, and a double aluminium heat exchanger ensures optimal warm air flow. The heater is designed to be mounted on the wall and is only 59 mm thick, so it won't take up too much space. An intelligent electronic control with a colour TFT display is used to set the power between 7 and 28 °C, which switches off when the setting is complete. It is possible to control the convector via Wi-Fi using a mobile phone app - allowing you to conveniently switch on and control the convector from anywhere with internet access.
Key features of the ELÍZ EL 3000 INV Wi-Fi
- Elíz thin heater with IP24 protection
- Heats rooms up to 32 m²
- Control via Wi-Fi or smart control with colour TFT display
- Equipped with a thermostat and controller that reduces power if the temperature rises to the desired value
- Allows you to set up to a weekly heating cycle
- The Elyse is designed to be attached to the wall
- Suitable for home or office
- Tip-over protection, overheating protection, anti-frost protection, child lock
Economical and safe heating
With the ELÍZ EL 3000 INV Wi-Fi you will certainly welcome the thermostat function, where you can set a wide range of temperatures and modes. The convector is also equipped with an intelligent temperature controller. Using the Inverter function, weekly timer and precise electronic thermostat, the convector saves at least 25% energy. Of course, there is also rollover protection, overheating protection, anti-frost protection and a child lock that locks the control panel buttons. If the power supply is interrupted, the electronics will remember all the set values and the selected modes will automatically start again.
Precise control and comfort
The electronic control with display allows you to easily set the desired temperature, which the convector automatically maintains at the selected value with an accuracy of 0.1 °C. A weekly timer mode can also be set with the option of setting 7 heating intervals for each day of the week, with a different temperature for each interval. The display will go dark after setup and when idle, and you can also adjust its brightness and dimming. Rapid air heating function, Sleep function - sleep mode automatically ensures a gradual reduction of the set temperature by 3 °C for 2 hours after activation.
Control:
Intelligent electronic control with Inverter technology
Topic:
7-28 °C (thermostat setting in 0.5 °C increments, phone setting in 0.1 °C increments)
Top surface:
24-32 m²
Total volume:
60-80 m³
Tension:
230 V
Sure:
10 A
Norms:
ERP, for heating energy efficiency
Dimensions:
1566 x 434 x 59 mm
Specifications
Design
Colour
Height
Width
Depth
Design
Design
Colour
Colour
Dimensions and weight
Height
Width
Depth
Weight
Technical Specifications
Power consumption
Heating power
Number of power levels
Noise
Cable length
IP Code
Heat capacity
Recommended room size
Heat capacity
Features
Control
Safety features
Equipment
Functions
Functions
More Specifications
ELÍZ – ohrievače vody s.r.o., Technická 7, 821 04 Bratislava, +420 725 881 505, [email protected]
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
