ELPUMPS Water pump JPV 1300 B Automatic

The technique and use of the JPV 1300 B Automatic water pump is no different from the JPV 1300 B and JPV 1500 B, only the operation is even easier with the JPV 1300 B, as everything is automatic. The unit is equipped with a top-of-the-range Coelbo pressure switch that automatically controls and protects the entire pump. The patented system includes an electronic sensor that controls the pump and maintains the appropriate pressure and flow. The switch replaces the expansion tank, pressure switch, pressure relief valve, pressure gauge and level switch with one compact, small-sized system. The unit will automatically start the pump when the minimum pressure (switch-on pressure) reaches the set value and switch it off after 10 seconds from stopping the flow.

Quiet operation and durable construction

Self-priming water jet pumps manufactured by ELPUMPS are suitable for transporting clean or lightly polluted water (without sedimenting substances) or non-aggressive and non-flammable liquids of similar properties. Thanks to its large power reserve, it can reliably transport large quantities of pumped fluid. The pumps are made of durable materials that prevent corrosion even during prolonged shutdown. The pumps are very quiet. The wide base is then good for keeping the machine stable and the wide comfortable handle for carrying it comfortably. JPV series pumps can be further equipped with an efficient 1 l pre-filter or an anti-idling protection. Use the hydrocontrol to turn them into an automatic waterworks. The JPP series pump is already equipped with a large pre-filter with a capacity of 2 l.

Possibilities of use

The JPV 1300 B Automatic water pump is suitable for filling and emptying tanks, pumping liquids, irrigation, operating irrigation systems, sprinkling or cleaning with pressurised water. It can also be used as an emergency pump in case of flooding. It can also be used for supplying households or industrial plants with drinking or utility water.

Techniques

The pump has a self-priming design, i.e. only the pump itself needs to be filled during commissioning. The internal structural elements of the pump are made of special durable plastic, so that they are not at risk of corrosion during prolonged shutdown. The pump casing is made of cast iron or stainless steel. The pump shaft is sealed with the latest professional double seal, combining spring and ceramic-silicon seals. The models with the B marking have a heavy-duty brass impeller, which has excellent anti-corrosion parameters, is far more resistant to the abrasive effect of dirt (sand particles, etc. ) and can withstand without deformation due to heat even when running empty (without water). The motor is specially hermetically sealed against water ingress and protected by a thermal fuse. The machine is designed in such a way that, apart from the mechanical seal, there are no components in the pump body that are subject to abrasion. ELPUMPS pumps are thus characterised by a very long service life. Depending on the nozzle diameter, the 1,300W pumps can pull up to 3 sprayers at once, the 1,500W up to 4 and the professional 2,000W up to 8 sprayers.

Technical Specifications:
Wattage: 1300W
Engine type: 230 V, 50 Hz
Max. pumping power: 5 400 l/hr
Max. Pressure: 4.7 bar
Max. height: 47 m
Max. suction height: 9 m
Thread diameter: 1″
The cable length: 1.5m
Cabling: H07 RNF 3 × 1 mm²
Max. temperature of the medium: 35°C
Weight: 17 kg