Name: HEISSNER Plastic patio pond set, 500 l
Brand: Heissner
SKU: HEImhjez06
Price: 207.59 EUR
Availability: InStock
Rating: 0 (0 reviews)

Catalogue

House, Hobby and GardenGardenPondsPond ConstructionPlastic Ponds

All from Heissner

HEISSNER Plastic patio pond set, 500 l - Pond - Main image

Pond - natural shape, 500 l, dimensions 157 x 125 x 54 cm, underwater filtration all in one, full-surface filtration surface, including filter media, three water effects, UV lamp 9 W, output 1 000 l/h, 10 m cable, 230 V/12 V lighting, 1.5 W LED power, cable length 7 m, including hose for connection, easy to place in the garden, optimum pond depth, does not contain heavy metals, does not contain plasticizers

Show full description

207.59 €

Compare

Watch Price/Availability

Add to list

Warranty 24 months Code: HEImhjez06

Help and manuals 1
Specifications
Photos & Videos 4
Accessories and suggested products

HEISSNER Plastic patio pond set, 500 l 207.59 € In stock > 5 pcs at the supplier's

Buy

HEISSNER Plastic patio pond set, 500 l

Enjoy the beauty of your own garden paradise with our Heissner plastic pond set! Our pond is the ideal choice for those who want to add an elegant and relaxing element to their exterior without complicated installation and costly maintenance. Thanks to the durable plastic material, our pond is resistant to weather and frost and guarantees long-term durability without the need for regular maintenance. Our plastic pond is easy to install and offers a wide range of options in terms of location and design. You can place water plants or decorative stones in it and create your own unique garden oasis. Appropriately selected pond technology guarantees clean water. The lighting can be placed directly in the pond under the water, to illuminate the water effect, or next to the pond and illuminate the pond at night. The water spout is not only decorative but also adds oxygen to the pond and thus prevents algae formation. Enjoy the relaxation and tranquility that the sound of running water and the beauty of life in your garden brings with our plastic pond.

Heissner HSP100-00 Effect Pump:

It has very low power consumption and high efficiency, 3 water effects, adjustable telescopic riser,

Output power:

1 100 l/h

Power consumption:

12 W

Transport height:

approx. 1.30 m

Cut height:

up to 15 cm

Dimensions (L × W × H):

17.5 × 16 × 11 cm

Hadic connection:

12.70 + 19.05 + 25.40 mm (1/2"+3/4"+1")

Length of supply cable:

10 m

Heissner U120-T LED lake lighting:

Can be used underwater or above water, ideal for underwater pond lighting, as well as for garden lighting, adjustable light tilt. Interchangeable slides to change the colour of the lighting.

Operating Voltage:

230 V/12 V

Dimensions (w × h):

6 × 7 cm

Output power:

1,5 W

Cable length:

Heissner 003245-00:

Made of polyresin, hardy and waterproof, UV and weather resistant. Suitable for use with Heissner pump HSP1000-00.

Colour:

Bronze

Dimensions:

14 x 22 x 12 cm

Heissner pond B501-00:

Volume:

500 l

Dimensions (L x W x H):

157 × 125 × 54 cm

Setting up the pond in 6 steps:

Step 1: site preparation

Place the plastic pond in the chosen location and then use the spade to mark the outline of the pond. It is important that the hole is 10-15 cm larger and deeper than the shape of the pond.

Step 2: excavation of a hole for the pond

Start by excavating the pond pit, including planting zones. Make sure that the pond is on a solid layer of soil and that there are no cavities. This is especially important so that the pond does not drop later.

Step 3: Determine the depth of the pond

The outer edge of the pit must be the same height at all points. For smaller ponds this can be checked very easily with a measuring bar and a spirit level. Different pond depths can be measured and adjusted in this step.

Step 4: settling of the pond

Apply a layer of sand about 10 cm thick on all horizontal surfaces. This simplifies the alignment of the pond on the one hand, and on the other hand guarantees optimal adjustment during settling. Now insert the pond into the prepared hole and align it with a spirit level.

Step 5: filling in the gaps

To prevent the pond from floating away, fill it halfway with water first. Add sand and water to the sides. The horizontal position of the pond must be continuously checked. Repeat this process until all cavities are filled with sand.

Step 6: Filling with water

If the pond is completely settled with sand and water (settled in the resulting mud), fill it completely with water. Place the aquatic plants in the planters in the designated plant zones. It is now possible to already place a pump for water effects and water movement, or to create a stream.