Lepidlo ALKAPREN 25 PLUS, 0,5 l, bez toluenu
Don't like the alternatives? Choose from the full product list
Lepidlo ALKAPREN 25 PLUS, 0,5 l, bez toluenu
Do you need to connect something perfectly and firmly? Then use Alkaprene 25 PLUS! This contact chloroprene solvent adhesive is designed for bonding materials that have a non-absorbent surface. The adhesive is toluene-free. The adhesive is applied with a squeegee, brush or spray gun.
Key features of Alkaprene 25 PLUS
- Contact chloroprene solvent adhesive
- Suitable for bonding materials with a non-absorbent surface
- Toluene-free glue
- The adhesive is applied with a squeegee, brush or spray gun
Use of Alkaprene 25 PLUS
1. Mix the glue thoroughly
2. Degrease and clean the material you want to apply the adhesive to.
3. Apply the adhesive in a thin layer with a squeegee, spray gun or brush.
4. Join the two surfaces together, for maximum effect it is advisable to weight them.
5. The bonded joint can be mechanically stressed up to 24 hours after bonding.
The ideal bonding temperature is 20°C, if the temperature is lower, the adhesive has a lower strength.
If the adhesive cools down to less than 5°C, it is unusable at that point. The supercooled adhesive regains its properties by being left in a room at a temperature of approx. 25 °C.
If the adhesive cools below 0°C, the adhesive coagulates and irreversibly loses its adhesive properties
Note:
H225 Highly flammable liquid and vapour.
H304 May cause death if swallowed and enters the respiratory tract.
H315 Irritating to skin.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long-lasting effects.
EURONÁŘADÍ s.r.o., č.p. 281, Komořany, 68301, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
