This page includes the most expensive angle Sanders Bosch, or more specifically all products from the category angle Sanders Bosch sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is BOSCH Diamond cutting disc Standard for Concrete 230 x 22,23 x 2,3 x 10 mm 2.608.603.243, which costs 328.74 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
300
Results
BOSCH Soft grinding plates 2.608.601.063
Sanding Plate - for Bosch eccentric grinders, soft, disc diameter 125 mm
BOSCH Support plate 115 mm M14 hard 2.608.601.783
Backing Pad - for angle grinders, Tough, diameter 115 mm, flange thread M14, extremely rigid construction with grooves, material thermostable plastic
BOSCH X-LOCK System support plate 115 mm thick 2.608.601.713
Backing Pad - for angle grinders compatible with the X-LOCK system, rough, diameter 115 mm, material thermostable plastic
BOSCH Braided pot brush 75 mm, steel 2.608.622.099
Sanding Brush for angle grinder - pot, to remove rust, cleaning, on metal and sheet metal, material steel, braided wire, max. 12500 rpm, clamping with M14 thread, brush diameter 75 mm, wire diameter 0,35 mm
BOSCH Grinding plates without mounting set 2.608.601.175
Sanding Plate - for Bosch eccentric grinders, hard, disc diameter 125 mm
Discounted -23 %
19.90 €
26.11 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh5301
BOSCH Diamond disc segment BPE, 125 x 22,23 mm 2.608.602.197
Diamond Disc - cutting, suitable for concrete, stone and tiles, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min
BOSCH Soft sanding pads, 115 mm 2.608.601.066
Sanding Plate - for Bosch eccentric grinders, soft, disc diameter 115 mm
BOSCH Bevel brush, crimped wire, 100, Stainless steel 2.608.622.108
Sanding Brush for angle grinder - disc, to remove rust, cleaning, on metal and sheet metal, material steel, crimped wire, max. 12500 rpm, chamfered, clamping with M14 thread, brush diameter 100 mm
BOSCH Sanding discs medium, 115 mm 2.608.601.065
Sanding Plate - for Bosch eccentric grinders, medium hard, disc diameter 115 mm
BOSCH Grinding plate for GSS 182 x 92 mm 2.608.000.072
Sanding Pad - Suitable for Bosch vibratory grinders, plate shape rectangular, plate fixing with quick-release system, abrasive fixing with Velcro, dimensions 92 × 182 mm (W × D)
BOSCH X-LOCK Standard for Universal, 115 × 22,23 × 2 × 10 2.608.615.165
Diamond Disc - cutting, suitable for concrete, metal, marble and tiles, classic, diameter 115 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 13300 rev/min, X-Lock mounting
17.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh3743
BOSCH Diamond cutting wheel Standard for Universal 125x22mm 2.608.615.059
Diamond Disc - cutting, suitable for concrete, brick, masonry, tiles and tiles, diameter 125 mm, installation hole 22.23 mm, maximum speed 8500 rev/min
17.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ZDnar2276
BOSCH X-LOCK Round wire brush wavy wire 2.608.620.732
Sanding Brush - wire, O 115, steel 115mm, 0.3mm
BOSCH Cup Brush Wavy Wire 70 1.608.614.020
Sanding Brush The Clean for Metal wire brush provides a very fine surface finish. The Cup Wire Brush features a crimped wire with a brass finish for less and medium-duty cleaning. It is suitable for removing coatings, rust and paint from medium and large ferrous and non-ferrous surfaces. This disc wire brush is also suitable for roughening, matting and cleaning of formwork boards and tiles. Brass-coated wires protect the brush against corrosion. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. Designed for use in angle grinders.
BOSCH Universal 180x22.23x2.2x7mm
Diamond Disc - cutting, suitable for concrete and brick, segmented, diameter 180 mm, installation hole 22.23 mm, thickness 2.2 mm, maximum speed 8500 rev/min
BOSCH Rubber grinding plate for angle grinders, Velcro, 125 mm 2.609.256.272
Sanding Pad - Suitable for Bosch angle grinders, plate shape circular, plate fixing with quick-release system, diameter 125 mm
BOSCH Standard Diamond Disc for Ceramic 125x22.23x1.6x7mm
Diamond Disc - cutting, suitable for ceramics, classic, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min
Discounted -11 %
15.90 €
17.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC10b7
BOSCH Standard Diamond Disc for Stone 115x22.23x1.6x10mm
Diamond Disc - cutting, suitable for concrete, stone and granite, segmented, diameter 115 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 13300 rev/min
Chcete doručit do České republiky? Jdi na
Úhlové brusky
Für den Versand nach Deutschland, besuchen Sie bitte
Winkelschleifer
Für den Versand nach Österreich, besuchen Sie bitte
Winkelschleifer
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Sarokcsiszolók