Archive - Construction Site Equipment
Choose an alternative in the category
Construction Site Equipment
11,559
Results
Cutting Pliers - splitting side two-sided 180mm, recessed pin
Discontinued
Order Code:
PROT0002
Cutting Pliers - side splitting pliers, double-dip plastic, 160mm, flush cutting edge
Discontinued
Order Code:
PROT0001
Stepladder 2v1 - trolley and steps for household use, height in folded state 111cm, height as steps 90cm, height as lady 108cm, load capacity - stairs 200kg, 80kg lady, weight 8.3kg
Discontinued
Order Code:
PHT0041
Discontinued
Order Code:
PHT0023
Discontinued
Order Code:
PHT0022
Tool trolley - dimensions 49,6 cm×66,7 cm×31,5 cm (w×h×d), weight 20,52 kg, mobile and lockable
Discontinued
Order Code:
PHT0021
Discontinued
Order Code:
PHT0020
Pillar Drill - 450W power, 700-2000/min idle speed, spindle taper Mk2, 16mm max drill bit diameter, 62mm max drilling depth
Discontinued
Order Code:
PROT0050
Cordless Screwdriver 3.6V, 1.3Ah, Li-Ion, 200 rpm, max torque 3Nm, rotating mechanism with LED torch in handle, 4 screwdriving, cutting, angular and eccentric
Discontinued
Order Code:
PROT0049
Mixer construction mixes, 1600W, one-stroke, two-speed, 180-460 rpm. / 300-700 rpm, stirrer diameter 140mm, stirrer length 560mm, weight 5.4kg
Discontinued
Order Code:
PROT0044
Electric Blade Sharpener - universal 65W power consumption, multipurpose diamond disc trimmer and integrated adapters allowing grinding of spiral drills from 3mm to 10mm in diameter, sharpening of knives and scissors in sizes from 6 to 51mm and the sharpening of chisels and planers of almost all common dimensions
Discontinued
Order Code:
PROT0043
Chainsaw Grinder - power 230W, 3000rot / min, wheel size 145x22.2x3.2mm, serves for sharpening of normal chainsaws of hand-held motor saws, the whole grinder is made of aluminium alloy and is equipped with work area lighting
Discontinued
Order Code:
PROT0042
Double Disc Sander - dual-wheel, power 550W, grinding wheel 200 x 25/40 x 16mm, due to the exact placement of the wheels, the grinder is fitted with cast-iron flanges and turned nuts, a cooling liquid container is part of the grinder, lighting, a plexiglass protective shield with a magnifier and a grinding wheel dresser
Discontinued
Order Code:
PROT0041
Double Disc Sander - two-disc low-speed, power 250W, abrasive wheel 150 x 20 x 12.7mm, low-speed disc 200 x 40 x 20mm, low-speed disc serves for sharpening of chisels, knives, etc., due to the exact placement of the discs, the grinder is fitted with cast-iron flanges and turned nuts
Discontinued
Order Code:
PROT0040
Double Disc Sander - two-disc, 250W power, grinding wheel 150 x 20 x 12.7mm, due to the precise placement of the discs, the grinder is fitted with cast-iron flanges and turned nuts
Discontinued
Order Code:
PROT0039
Wrench Set combination with the size of 10 mm, 12 mm, 13 mm, 14 mm, 17 mm, 19 mm and 8 mm (metric thread), combination, reversible and ratchet, CrV steel, key sizes are 8 mm and 10 mm, set includes 7 piece(s), includes keys from 8 mm up to 19 mm, double-sided keys
Discontinued
Order Code:
PROT0038
Tool Set - 7 ratchet wrenches, contains 8, 10, 12, 13, 14, 17 and 19mm ratchet wrenches, made of chrome-vanadium steel, 5° ratcheting movement, tightening torque complies with ANSI standards
Discontinued
Order Code:
PROT0037
Chainsaw electric, power: 2kW, 40,6cm cutting length, chain pitch: 3/8", tooth spacing: 1,3mm, weight: 5kg
Discontinued
Order Code:
BOF033d5
Mitre saw - with feed rate, 2000W, 4800rpm, 250x30mm disc, 0°/+45° inclination, table angle -45°/0°/+45°, laser beam, weight 11kg
Discontinued
Order Code:
BOK007c2
Mitre saw with slide, 1800W, 4800rpm, disc 210x30mm, inclination 0°/+45°, angle of table rotation -45°/0°/+45°, laser beam, weight 11kg
Discontinued
Order Code:
BOK007a2
Cordless Drill without hammer, 20 V, Li-Ion, maximum torque: 50 Nm, motor type: carbon, chuck range: 13 mm, package includes 1 × 1,5 Ah batteries
Discontinued
Order Code:
PWP0024d2
Discontinued
Order Code:
GAR357m3
Cordless Drill - hammer drill, Li-Ion, 18V, 1.5Ah, two gears, 0-400/0-1350rpm, max. torque 38Nm, chuck max. 10mm, case
Discontinued
Order Code:
BOD002s5
Discontinued
Order Code:
Moto07028
