Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases with all products marked as *In stock on Alza
- Get the product of your dreams today, without further delay
Construction Site Equipment instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
1,311
Results
Free deliveryAlzaboxes and stores
Inspection Camera - with saving the recorded footage, Full HD video, LCD display, 145° angle of view, adjustable LED illumination, IP67, camera diameter 22 mm, cable length 40 m
Drill - 1010 W, with hammer, speed up to 2900 rev/min, quick release, maximum chuck size: 13mm, weight: 2,5kg
Thermal Imaging Camera - Measured temperature range from -20 to 400 °C, measurement accuracy ± 1.8 °C, temperature sensitivity 150 mK, spectral range 8 - 14 µm, operating temperature from -10 to 45 °C, refresh rate 25 Hz, manual focus, horizontal field of view 33°, vertical field of view 18°, The LCD display is 2.40" with a resolution of 320 × 240 px, integrated camera included, USB micro connector, 16 GB internal memory, power supply through the integrated battery, max. operating time 6 h, portable box included, weight 300 g
Angle Grinder - cordless, disc diameter 125 mm, max. speed 8500 rev/min, additional handle and antivibration handle, requires 2 replaceable batteries with a battery capacity 5 Ah and 18 V voltage, dimensions 14 × 15.1 × 36.2 cm (W×H×D), weight 2.5 kg, transport case, charger, service key, battery and protective cover included
SDS-Plus Rotary Hammer Drill - with pneumatic hammering, power input 470 W, chuck SDS Plus, 2100 rev/min rated speed, 4800 impact rate per minute, impact energy 1,4 J, weight 2 kg
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, depth stop adjustment, rubberized non-slip handle, L/P course, cable length 4m, weight 1.4kg
Double Disc Sander - electric, power consumption 550 W, up to 2850 RPM, disc dimensions: 40 × 200 mm (thickness × diameter), 60 and 36 grain size, protective cover, non-slip base, table mounting, lighting, adjustable work supports and wet grinding capability, disc included, dimensions: 50 × 34.5 × 33 cm (H×W×D), weight 19 kg
Tool Set practical, mobile tool trolley with an impressive 500-piece assortment of a wide range of screwdrivers, ratchet and socket wrenches, various pliers and combination ratchet wrenches up to the bit screwdriver with ratchet function and the corresponding range of bits, a spirit level is included, tape measure and the like
Rotary Hammer - with pneumatic impact, SDS Plus clamping, maximum speed 1100 rpm 4000 beats/min, impact force up to 2 J, weight 3,5 kg
SDS-Plus Rotary Hammer Drill - with pneumatic hammering, chuck SDS Plus, 850 rev/min rated speed, impact energy 1 J, weight 2,2 kg
Rotary Hammer -, SDS Plus, impact rate at rated speed up to 1,7 J, max rated speed: 1350 RPM, impact rate at rated speed: 5000/min, weight: 3,2kg
Angle Grinder - power input 1400 W, disc diameter 125 mm, max. speed 11000 rev/min, antivibration handle, dimensions 14 × 11.6 × 30.3 cm (W×H×D), weight 2.5 kg, service key and protective cover included
Angle Grinder - cordless, disc diameter 125 mm, max. speed 8500 rev/min, additional handle, requires 2 replaceable batteries with a battery capacity 5 Ah and 18 V voltage, dimensions 14 × 14.5 × 36.2 cm (W×H×D), weight 2.5 kg, charger, service key, battery and protective cover included
Chainsaw - battery, carbonless motor, 30.5 cm bar length, cutting speed 10 m/s, chain pitch 3/8", oil tank volume 120 ml, automatic chain lubrication, antivibration system and chain brake, Li-Ion battery with voltage 20 V and capacity 2 Ah, battery, charger and strip cover included in package, weight 2.7 kg
Demolition Hammer - power input 2200 W, 1350 impact rate per minute, impact energy 66 J, weight 19,6 kg
Thermal Imaging Camera - Measured temperature range from -20 to 400 °C, measurement accuracy ± 2 °C, temperature sensitivity 70 mK, spectral range 8 - 14 µm, operating temperature from -10 to 60 °C, refresh rate 25 Hz, manual focus, horizontal field of view 38°, vertical field of view 50°, The 2.8" LCD display has a resolution of 320 × 240 px, integrated camera included, USB-A and USB-C connector, 8 GB internal memory, power supply through the integrated battery, max. 4 h operation time, USB-C to USB-A cable included, weight 600 g
Line Laser - Range 20 m, for internal use, 2 planes, the green colour of the laser, 1/4" thread for tripod, batteries, Satchel, the target plate of the laser, aa battery adapter and universal holder included
Thermal Imaging Camera - max. temperature 550 °C, measurement accuracy ± 2 °C, temperature sensitivity 50 mK, spectral range 7.5 - 14 µm, operating temperature 50 °C, refresh rate 25 Hz, fixed focus, horizontal field of view 50°, vertical field of view 50°, The LCD display is 2.4" with a resolution of 320 × 240 px, IP protection IP54, USB-C connector, 4 GB internal memory, Dimensions 19,6 × 11,7 × 5,9 cm (H×W×D), weight 340 g
Angle Grinder - cordless, disc diameter 115 mm, max. speed 7500 rev/min, additional handle, requires battery with 4 V voltage, weight 3.2 kg, charger, battery, disc and protective cover included
Chainsaw - battery, 35 cm bar length, battery with voltage 40 V, weight 4.1 kg
Demolition Hammer - power input 1300 W, chuck SDS Max, 4100 impact rate per minute, impact energy 20 J, weight 6 kg
Rotary Hammer - power input 1600 W, chuck SDS Max, 3800 impact rate per minute, impact energy 10 J, weight 7,3 kg
Mitre saw - desktop, suitable for wood, AKU drive type, other features: integrated vacuum, outer disc diameter 190 mm, left mitre cut 45°, right mitre cut 45°, adjustable tilt 45° (left), cutting depth 45 mm at 90°/90° angle, 38 mm at 90°/45° angle, 45 mm at 45°/90° angle, 38 mm at 45°/45° angle, 4500 rev/min, mounting key included in the package, weight 7.1 kg