Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases with all products marked as *In stock on Alza
- Get the product of your dreams today, without further delay
Work Tools instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
1,269
Results
Drill - 710 W, with hammer, speed up to 3200 rev/min, maximum torque: 24 Nm, quick release, maximum chuck size: 13mm, weight: 2kg
Cordless Drill without hammer, 18 V, Li-Ion, maximum torque: 91 Nm, motor type: carbon, chuck range: 13 mm, with carrying case
Cordless Drill without hammer, 12 V, Li-Ion, maximum torque: 30 Nm, motor type: carbon, chuck range: 10 mm, with carrying case
Screwdriver Set - stripped handles, shank material s2 steel, tester included
Cordless Drill with hammer, 12 V, Li-Ion, maximum torque: 30 Nm, motor type: carbon, chuck range: 10 mm, with carrying case
Workshop Heater , dimensions: 34cm × 23,2cm × 45,6cm, made of steel material, colour: silver
Chainsaw - battery, carbonless motor, 35 cm bar length, cutting speed 11.2 m/s, chain with 53 link, chain pitch 3/8", oil tank volume 150 ml, antivibration system, recoil protection, chain brake, bumper Spike and chain tensioning, battery with voltage 40 V, weight 4.4 kg
Heat Gun 1800 W, maximum temperature up to 600 °C, air flow 550 l/min, equipment: thermal protection and temperature regulation
Angle Grinder - power input 2500 W, disc diameter 230 mm, max. speed 6500 rev/min, additional handle and antivibration handle, weight 5.9 kg, transport case and protective cover included
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, rubberized non-slip handle, cable length 4m, weight 1.3kg
Flat Wrench Set - double-sided, ratchet, material chrome-vanadium steel, 10 keys per pack
Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, with carrying case
Power Sander - electric, power input 180 W, 24000 OPM, rectangular sanding pad, clamp sync paper fastening, sanding surface dimensions 101 × 113 mm (L×W), dust filter, exterior suction, weight 1.2 kg, dimensions 14.4 × 17.7 × 22.4 cm (H×W×D), dust bag and 2 sanding sheets included
Chainsaw - petrol, power 1.5 kW, 40 cm bar length, chain pitch 3/8", automatic chain lubrication, antivibration system, chain brake and bumper Spike, manual starting system, strip cover included in package, weight 4.6 kg
Double Disc Sander - electric, up to 2950 RPM, disc dimensions: 20 × 150 mm (thickness × diameter), 80 grain size, table mounting, dimensions: 33 × 30 × 33 cm (H×W×D), weight 7.3 kg
SDS-Plus Rotary Hammer Drill - with mechanical hammering, power input 800 W, chuck SDS Plus, 1200 rev/min rated speed, 4600 impact rate per minute, impact energy 2,4 J, weight 2,8 kg
Torque Wrench - Digital, ratchet, torque from 10 to 50 Nm, automatic shutdown, 1/4" square, overall length 390 mm
Rotary Hammer - 800W, SDS Plus, impact rate at rated speed up to 2,9 J, max rated speed: 1100 RPM, impact rate at rated speed: 4500/min, weight: 3,5kg
Cordless Drill without hammer, 18 V, Li-Ion, maximum torque: 54 Nm, motor type: carbonless, chuck range: 13 mm, with carrying case
Charger and Spare Batteries Quick charger and replacement battery - compatible with more than 300 products from the Einhell Power X-Change programme, includes 1x battery with selectable capacity of 4.0 Ah / 6.0 Ah depending on the application and 1x quick charger with 6 A charging current