Napájení zdroj TAGAN DualEngine TG500-U25 500W ATX 2.2
Don't like the alternatives? Choose from the full product list
Napájení zdroj TAGAN DualEngine TG500-U25 500W ATX 2.2
Discontinued
Napájení zdroj TAGAN DualEngine TG500-U25 500W ATX 2.2
Precise power supply to power 500 W suitable for the most gaming computers and workstations.Source is intended for AMD and Intel platforms and meets the specifications NVIDIA SLi.The technology DTT (Dual Transformer Technology) is the use of two transformers, each for one of the two independent branches.It is thus ensure a high stability and equitable burden of power branches.Source due to its effectiveness in excess of 80% at full load and the system of active PFC (protection against interference with nearby electrical appliances and recover the harmonious radiation to the network) offers maximum reliability, stability and very high performance.
It is equipped with two PCI Express connectors with improved EMI shielding and ten Serial ATA power connectors, which can be used to reduce the power supplied older IDE hard drives.Power supply to the motherboard meets the specifications ATX 2nd2 and Intel EPS12V 2nd9, and of course is to support the older format ATX boards 2nd01 and 13rdThere are connectors for the configuration of 20, 20 +4, 24 +4 and 24 +8.For other peripherals are available seven classic molex connectors.The cooling of the old pair of high-quality and still 80 mm fans with speed controlled according to temperature and noise 28 dB at maximum load resources.
The parameters and specifications:
Main features:
Supported platforms AMD and Intel
Output 500 W
Active PFC
The effectiveness of over 80% at full load
Format:
ATX 2nd2, 2nd01, 13
Intel EPS12V 2nd9
Performance:
500 W
In +3.3 branch:28 A (maxload)
+5 V branch:28 A (maxload)
+12 V branch 1:20 A (maxload)
+12 V branch 2:20 A (maxload)
-5 In branch:0.5 A (maxload)
-12 The branch:0.5 A (maxload)
+5 VSB branch:3 A (maxload)
The combined load (3.3 V 5 V 12 V):480 W
Output connectors:
1 x 20 +4 pin ATX / EPS
1 x 4 pins in 12
1 x 8 pins 12 V
7 x 4-pin Molex / VGA
1 x 4 pins for the Floppy
10 x 5 pins for the Serial ATA
2 x 6 pins for PCI Express
1 x GND (uzemění)
Fan:
2 x 80 mm sources
Speed:c. 1300 - 2600 rpm
21 dB at 1450 rpm - 20% load
28 dB at 2595 rpm - 100% load
Dimensions:
150 x 170 x 86 mm
Weight:
3.3 kg
The contents of the package:
Source
4 x Reduction for SATA power -> IDE
It is equipped with two PCI Express connectors with improved EMI shielding and ten Serial ATA power connectors, which can be used to reduce the power supplied older IDE hard drives.Power supply to the motherboard meets the specifications ATX 2nd2 and Intel EPS12V 2nd9, and of course is to support the older format ATX boards 2nd01 and 13rdThere are connectors for the configuration of 20, 20 +4, 24 +4 and 24 +8.For other peripherals are available seven classic molex connectors.The cooling of the old pair of high-quality and still 80 mm fans with speed controlled according to temperature and noise 28 dB at maximum load resources.
The parameters and specifications:
Main features:
Supported platforms AMD and Intel
Output 500 W
Active PFC
The effectiveness of over 80% at full load
Format:
ATX 2nd2, 2nd01, 13
Intel EPS12V 2nd9
Performance:
500 W
In +3.3 branch:28 A (maxload)
+5 V branch:28 A (maxload)
+12 V branch 1:20 A (maxload)
+12 V branch 2:20 A (maxload)
-5 In branch:0.5 A (maxload)
-12 The branch:0.5 A (maxload)
+5 VSB branch:3 A (maxload)
The combined load (3.3 V 5 V 12 V):480 W
Output connectors:
1 x 20 +4 pin ATX / EPS
1 x 4 pins in 12
1 x 8 pins 12 V
7 x 4-pin Molex / VGA
1 x 4 pins for the Floppy
10 x 5 pins for the Serial ATA
2 x 6 pins for PCI Express
1 x GND (uzemění)
Fan:
2 x 80 mm sources
Speed:c. 1300 - 2600 rpm
21 dB at 1450 rpm - 20% load
28 dB at 2595 rpm - 100% load
Dimensions:
150 x 170 x 86 mm
Weight:
3.3 kg
The contents of the package:
Source
4 x Reduction for SATA power -> IDE
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
